2-axis NC handling device, insertion robot for automation, removal automation, inserter, servo robotGETECHA
GL-20S
2-axis NC handling device, insertion robot for automation, removal automation, inserter, servo robot
GETECHA
GL-20S
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۲٬۸۰۰
وضعیت
کارکرده
موقعیت
Hessisch Lichtenau 

اطلاعات دستگاه
- نام دستگاه:
- 2-axis NC handling device, insertion robot for automation, removal automation, inserter, servo robot
- تولید کننده:
- GETECHA
- مدل:
- GL-20S
- وضعیت:
- کارکرده
قیمت و مکان
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۲٬۸۰۰
- موقعیت:
- 37235 Hessisch Lichtenau

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A6306388
- شماره مرجع:
- 59928
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۱.۱۲.۱۴۰۴
توضیحات
2-axis pick-and-place unit, loader, servo robot, workpiece gripper, component insertion unit, pick-and-place robot
Hjdpfx Aeharwyol Dop
Pick-up device, handling device for presses, lathes, etc.
GETECHA, Type GL-20S
Serial No. 13836, Year of manufacture 10/2003
Travel range, Z-axis: 1900 mm
Travel range, Y-axis: 250 mm
Travel speed, Z-axis: max. 1100 mm/sec.
Travel speed, Y-axis: max. 227 mm/sec.
Continuously variable travel speed in the Y and Z axes via servo motors SMB
- Precise axis movement via linear guides
- Control system: epis
- Control panel located nearby
- Interfaces for conveyor belt, gripper magnets, ejector cylinders, vacuum, gripper
- External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic mode
- Mounted gripper with 3 lifting magnets, 3 pneumatic ejector cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke)
- Operating hours: 25998 hrs.
The unit was used as a loader/pick-up device on a press.
Space requirement L x W x H: 2900 x 1800 x 2000 mm
Weight: approx. 800 kg
Good condition
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Hjdpfx Aeharwyol Dop
Pick-up device, handling device for presses, lathes, etc.
GETECHA, Type GL-20S
Serial No. 13836, Year of manufacture 10/2003
Travel range, Z-axis: 1900 mm
Travel range, Y-axis: 250 mm
Travel speed, Z-axis: max. 1100 mm/sec.
Travel speed, Y-axis: max. 227 mm/sec.
Continuously variable travel speed in the Y and Z axes via servo motors SMB
- Precise axis movement via linear guides
- Control system: epis
- Control panel located nearby
- Interfaces for conveyor belt, gripper magnets, ejector cylinders, vacuum, gripper
- External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic mode
- Mounted gripper with 3 lifting magnets, 3 pneumatic ejector cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke)
- Operating hours: 25998 hrs.
The unit was used as a loader/pick-up device on a press.
Space requirement L x W x H: 2900 x 1800 x 2000 mm
Weight: approx. 800 kg
Good condition
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
ارسال درخواست
تلفن & فکس
+49 5602 ... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
آگهی کوچک
Helmstedt
۴٬۰۶۴ km
PolarL 600-G-3
آگهی کوچک
Grebenau
۴٬۱۲۵ km
WEBERDH 1000
آگهی کوچک
Bischofszell
۴٬۰۷۸ km
GABLERD 450
آگهی کوچک
Eislingen/Fils
۴٬۰۶۴ km
مطبوعات مشت زدن خودکار
KAISERV 63 W 1080
KAISERV 63 W 1080
آگهی کوچک
Helmstedt
۴٬۰۶۴ km
AffeldtSA 05-25
آگهی کوچک
اسلوونی
۳٬۷۲۷ km
KraussMaffeiKM50-180CX
آگهی کوچک
Wrocław
۳٬۶۳۲ km
Wanner TechnikC13.20 SV
آگهی کوچک
Helmstedt
۴٬۰۶۴ km
Sitma740 T
آگهی کوچک
Burgoberbach
۴٬۰۱۲ km
KraussMaffei80-220C2
آگهی کوچک
Berlin
۳٬۹۱۹ km
RowaP-4-s
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است
































































