FLAT GRINDING MACHINE

GERD WOLFF G115

The G115 flat grinder is a compact grinding machine designed for processing the circumference or end face of the grinding wheel on horizontal or vertical surfaces of a workpiece. Using fixtures or shaped grinding wheels, it is also possible to machine inclined or contoured surfaces. The machine is ideally suited for small businesses, maintenance operations, home workshops, laboratories, instructional demonstrations, and more.

TECHNICAL DATA

Maximum removal rate: not greater than 0.03 mm

Maximum linear speed of the grinding wheel: 35 m/s

Table size: 152×304 mm

Maximum grinding height: 210 mm
Dodpfsxb Uq Djx Ag Iswf

Longitudinal travel of worktable: 340 mm

Cross travel of worktable: 170 mm

T-slot of worktable: 1–12 mm

Grinding wheel outer diameter × bore × width: 180×32×13 mm

Grinding head motor: 550 W / 220 V

Vertical feed handwheel increment: 0.025 mm

Lateral feed handwheel increment: 0.02 mm

Net weight / gross weight: 210 / 260 kg

Machine dimensions: 930×780×730 mm

Packing dimensions: 1100×760×860 mm

The worktable can be moved forwards and backwards as well as left and right.
The grinding head can be raised and lowered vertically.
High rigidity throughout the entire machine structure.
The grinding head operates smoothly.
Compact design and low noise emissions.

A working enclosure is available separately.

The machine is lubricated via a manual oil pump. To lubricate, simply pull out the handle.
If you require special accessories to increase work efficiency, please contact customer service. Special accessories must be purchased separately.

PRODUCT INFORMATION:
From the proximal end of the main spindle, the radial run-out of the tapered bore axis is 0.01–0.02 mm at a distance of 100 mm.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.