Ergomag magnetic polishing systemForplan
PM 3000
Ergomag magnetic polishing system
Forplan
PM 3000
سال ساخت
۲۰۲۳
وضعیت
کارکرده
(کاملاً عملیاتی)
موقعیت
Pforzheim 

اطلاعات پایه
- نام دستگاه:
- Ergomag magnetic polishing system
- تولید کننده:
- Forplan
- مدل:
- PM 3000
- شماره دستگاه:
- 18439
- سال ساخت:
- ۲۰۲۳
- وضعیت:
- کارکرده
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
- موقعیت:
- Hanauer Straße 5-7, 75181 Pforzheim, Deutschland

تماس بگیرید
جزئیات فنی
ابعاد و وزن
وزن کل:
۲۲۰ کیلوگرم
طول کل:
۸۷۵ میلیمتر
عرض کل:
۱٬۰۱۰ میلیمتر
ارتفاع کل:
۱٬۶۱۰ میلیمتر
جزئیات قدرت
ولتاژ ورودی:
۲۳۰ V
نوع جریان ورودی:
سه فاز
ویژگیهای ایمنی
توقف اضطراری
مستندسازی و گواهینامه
مستندات / راهنما
جزئیات پیشنهاد
- شناسه آگهی:
- A23342666
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۷.۰۸.۱۴۰۵
توضیحات
Forplan Ergomag PM 3000 with ultrasonic cleaning bath, type UPE 25 DGL, year of manufacture 2023, and centrifugal dryer, type 270, year of manufacture 2023.
The Ergomag PM 3000 is used for removing burrs, edges, splinters, and fiber protrusions from workpieces. The process is based on the gentle movement of magnetizable stainless steel pins (cylindrical pins), which are precisely guided by a high-frequency, rotating magnetic field. This enables effective and at the same time material-friendly processing of the component surfaces.
The movement of the stainless steel pins ensures, in particular, the deburring of hard-to-reach areas such as holes, undercuts, and small internal contours. Processing marks from turning, milling, or other machining processes are reliably removed. The result is a homogeneous surface structure, which often eliminates the need for subsequent processing or deburring steps.
The system features a four-bowl assembly made of wear-resistant polyurethane with ergonomic handles for easy removal of the containers. The machine equipment also includes a machine frame, an electrical unit, a motor unit, and a circulation pump. The electrical unit consists of a control cabinet with an integrated operating terminal, which is used to set the relevant process parameters, such as the rotational speed of the magnetic plate and the processing time. The motor unit generates the movement of the magnetic field required for the processing process.
Ibedpfo Aknwmex Aizod
To complement the manufacturing process, an ultrasonic cleaning bath, type UPE 25 DGL, year of manufacture 2023, is integrated into the workflow. The ultrasonic cleaning bath is used for thorough cleaning of the workpieces after the deburring process and reliably removes adhering particles, machining residues, and process media from hard-to-reach areas.
In addition, a centrifugal dryer, type 270, is available. The centrifugal dryer is used after the cleaning process and ensures fast and gentle drying of the workpieces. This removes residual moisture and water residues.
The combination of magnetic deburring, ultrasonic cleaning, and centrifugal drying creates a continuous process for processing, cleaning, and drying the workpieces. This reduces transport distances, minimizes manual handling steps, and ensures reproducible process quality.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
The Ergomag PM 3000 is used for removing burrs, edges, splinters, and fiber protrusions from workpieces. The process is based on the gentle movement of magnetizable stainless steel pins (cylindrical pins), which are precisely guided by a high-frequency, rotating magnetic field. This enables effective and at the same time material-friendly processing of the component surfaces.
The movement of the stainless steel pins ensures, in particular, the deburring of hard-to-reach areas such as holes, undercuts, and small internal contours. Processing marks from turning, milling, or other machining processes are reliably removed. The result is a homogeneous surface structure, which often eliminates the need for subsequent processing or deburring steps.
The system features a four-bowl assembly made of wear-resistant polyurethane with ergonomic handles for easy removal of the containers. The machine equipment also includes a machine frame, an electrical unit, a motor unit, and a circulation pump. The electrical unit consists of a control cabinet with an integrated operating terminal, which is used to set the relevant process parameters, such as the rotational speed of the magnetic plate and the processing time. The motor unit generates the movement of the magnetic field required for the processing process.
Ibedpfo Aknwmex Aizod
To complement the manufacturing process, an ultrasonic cleaning bath, type UPE 25 DGL, year of manufacture 2023, is integrated into the workflow. The ultrasonic cleaning bath is used for thorough cleaning of the workpieces after the deburring process and reliably removes adhering particles, machining residues, and process media from hard-to-reach areas.
In addition, a centrifugal dryer, type 270, is available. The centrifugal dryer is used after the cleaning process and ensures fast and gentle drying of the workpieces. This removes residual moisture and water residues.
The combination of magnetic deburring, ultrasonic cleaning, and centrifugal drying creates a continuous process for processing, cleaning, and drying the workpieces. This reduces transport distances, minimizes manual handling steps, and ensures reproducible process quality.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
آخرین بار آنلاین: هفته گذشته
ثبت شده از: 2026
۱ آگهی آنلاین
ارسال درخواست
تلفن & فکس
+49 7231 ... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است














