Pallet conveyor line

forPAC PICKING LINE

Transport Pallets / PICKING LINE

- TYPE OF PALLETS = WOODEN PALLETS

- DIMENSIONS TO BE HANDLED = 1200X800 mm conveyable on rollers
600x800 mm conveyable in the loading section for hooding

Picking line composed as follows:

1. Motorized Roller Conveyor for Pallets
• Conveyor height: h=550 mm, adjustable ± 60mm.
• Photoelectric cell group and reflector mounted on adjustable supports and protected by galvanized steel upper cover.
Qty:
No. 35 CONVEYOR L 6000 MM
No. 4 CONVEYOR L 3000 MM
No. 15 CONVEYOR L 2000 MM

2. Motorized Roller Turntable from 0° to 90°
Qty: No. 2

3. PALLET TRANSFER SHUTTLES
- Shuttle: single pallet position, roller conveyor
• Shuttle cart with track guide: capacity for 1 loaded pallet (roller transport).
• Useful transport length Lu = 1500 mm.
Quantity: 1

Pallet shuttle: rail for recessed installation
Quantity: approx. 15 m

Pallet shuttle: onboard electrical panel
Quantity: 1

Pallet shuttle: position detection
Quantity: 1

Pallet shuttle: end blind bar
Quantity: 1

Pallet shuttle: blind bar
Quantity: 3

Pallet shuttle: anti-collision device PLS (proximity laser scanner)
Quantity: 2

4. PICKING AREAS:

- Motorized Roller Conveyor for Pallets
• Conveyor height: h=550 mm, adjustable ± 60mm.
Qty:
No. 4 CONVEYOR L 3000 MM
No. 5 CONVEYOR L 1500 MM

Credpfjxivqnjx Afneh
- 90° Transfer
consisting of a 3-chain motorized conveyor L=1600 mm as follows:
Fixed section of transfer: 3-chain conveyor;
Qty: No. 2

- Pallet Conveyor: 3-chain motorized type
Qty: No. 8 Useful transport length Lu = 3000 mm
Qty: No. 4 Useful transport length Lu = 1500 mm

5. PALLET WRAPPING AREAS:

- Motorized Roller Conveyor for Pallets
• Conveyor height: h=550 mm, adjustable ± 60mm.
• Photoelectric cell group and reflector mounted on adjustable supports and protected by galvanized steel upper cover.
Qty:
No. 1 CONVEYOR L 1500 MM
No. 3 CONVEYOR L 2000 MM
No. 1 CONVEYOR L 3000 MM

- Motorized Roller Turntable from 0° to 90°
Qty: No. 1

ELECTRICAL AND AUTOMATION SYSTEM FOR PALLET CONVEYORS
The automation for the conveyors consists of an independent electrical control panel designed for the supervision and management of the above-mentioned conveyor systems.

The electrical panel is manufactured in painted steel.
Its components are logically and functionally arranged; on one side there is the main switch with operator panel and PLC controller, while on the other side all the drive control components for the motors are located.

The system consists of hardware and software completely designed by Forpac; the hardware is built using components from leading manufacturers on the market, while the software is programmed taking into account all the specific requirements of the plant to be automated.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.