Portal milling machine

FOREST-LINE Seramill 300G

Technical description Value Unit

Travel distance
X-axis: 11,450 mm
Y-axis: 3,500 mm
Z-axis: 1,250 mm

Cross-section of the Z-axis slider: 360 x 360 mm
Portal aperture: 3,000 mm
Height under vertical spindle: 1,400 mm
Working clamping width: 2,500 mm

Milling unit: Type FA 305 C
Power: 30 kW
Max. torque: 1,070 Nm
Max. speed: 4,000 rpm
Cross section of the pusher: 360 x 360 mm

Vertical head with spindle
Power: 30 kW
Max. speed: 4,000 rpm
Max. torque: 1,070 Nm
Rapid traverse in X, Z: 25,000 mm/min
Rapid traverse in Y: 20,000 mm/min
Work feed infinitely variable in X, Y and Z: 10,000 mm/min
Compressive force of each axis: 25,000 N
Tool holder: SK 50




Horizontal angle head with 144 x 2.5° pitch, with SK50 spindle
Gusdpfx Astix S Nedhok
Available power: 30 kW
Max. speed: 4,000 rpm
Max. torque: 1,070 Nm
Positioning increment: 2.5 degrees

Longitudinal pallet system
1 pallet shuttle with 2 storage stations
1 manual pallet transfer system between machine and shuttle
2 workpiece holder pallets: 5,000 x 2,500 mm

Tool changer
Chain magazine: 80 positions
Distance between the positions on the chain: 130 mm
Diameter of consecutive tools: 125 mm
Tool diameter max.: 200 mm
Maximum tool length: 400 mm
Tool weight max.: 25 kg
Tool change time, tool to tool: 8 sec
Tool change time, chip to chip: 38 sec



Equipment:
Cooling devices:
- Cooling via orientable nozzles
- IKZ / cooling through the center of the spindle, 3,000 l tank,
capacity: 30 l/min, pressure: 7 bar at the mold

2 chip conveyors: 1
Portal cladding
Measuring probe, make: RENISHAW, type: MP14
Electronic handwheel
Remote diagnosis
Tool management and wear management
Documentation in 2 copies: German / French
CE marking

Very well maintained, continuously serviced condition!

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.