Tipper

Fliegl ZHKS 350 - 25 m³

Custom-made transport solution
Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

More information
Chassis, semi-trailer, tipper
Fine-grained steel welded construction, in basic lightweight design, turntable with interchangeable 2 kingpin
Curved front end, patented
24 tons, 2-speed landing gear, single-side operation, with straight lower part, without thrust compensation
Underrun protection, foldable
Half-shell mudguards
Towing hook at the rear
Axles + suspension
SAF disc brake axles with 430 mm disc diameter
Axle/suspension laser-aligned to reduce tire wear and fuel consumption
Axles in off-road design
Air suspension
1st axle, automatic lift axle, including forced lowering and starting aid
Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through
Braking system
2-line compressed air braking system, color-coded lines for easy servicing
Spring-loaded parking brake
2 fail-safe coupling heads at the front, without connection line
EBS, electronic braking system with EBS socket at the front, without connection cable
Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS!
With lifting and lowering valve
Vehicle - driving stability system
Wheels and tires
385/65 R22.5
Steel rims, factory silver
Lredpfx Aei Ri Nfslmsp
"TPMS" tire pressure monitoring system according to ECE R 141, display via the display in the towing vehicle, via EBS, without truck installation (this must be available in the truck. Only for basic tires).
Electrical system
24 volts, multi-chamber lights, yellow LED lighting on the side
Yellow LED lighting on the side coupled with the turn signal "Flashing side lights"
2 white position lights at the front
2 white/red marker lights at the rear
2 x 7-pole fail-safe sockets at the front, without connection cable
Hydraulics
Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw connection, fixed part, NW 48 mm (without hose connection)
Operation hydraulically via truck auxiliary drive
Body
Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinder with ladder on the front wall.
Greenline - conical and aerodynamic body shape
Shovel and broom holder on the outside of the front wall.
Membrane - rear wall
Rear wall as a swing gate with double hinge, externally mounted with double hook locking. 2 clamping screws with lever locks on the side below.
Side walls continuous, 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized construction
Standing platform with ladder, connection plate for air/electricity and brake with large space for best possible operation.
Roll cover on one side for stowing on the right, with central locking on the left
Country of registration/signs
Germany
With Dekra approval and certificate (according to §13 EG - FGV)
Superstructure strength according to EN 12642
24/7 service hotline
Prepared for license plate holder, single row
Contour marking with reflective tape according to ECE R 048, white on the side and red at the rear
Paint finish
Frame DB 7350 Novagrau
10-year warranty against rust-through
Support feet, black coated
Body RAL, single color
Roll cover RAL, single color

Available in thermally insulated design!

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.