Open semitrailer

Fliegl 3-Achs Plateau SDS 380 Spezial Mega-Z

Fine-grain steel welded construction, kingpin plate with replaceable 2" kingpin, additional splash guard riveted to the bottom on the underside, in the neck area above the rear axle of the semi-trailer and above the wheels on the vehicle, frame in reinforced design for vehicle loads up to the outer frame, outer frame with "Load-Lock profile" approximately every 400 mm, for lashing strap attachment, 10 pairs of lashing points recessed on the top/outside in the outer frame, each 10 tons, 24 tons. Two-stage support winch, single-sided operation, with semi-circular lower part and straight connection plate, with thrust compensation, foldable rear support, support wedges with holder, aluminum side impact protection, steel under-run protection, quarter-shell fenders in front of and behind each axle, with additional sheet metal splash guard above the wheels, with anti-spray flaps according to EC, 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking recesses in the floor for 2 x 20 ft or 1 x 40 ft container, 4 pairs of container locking adapters, (additional transverse support required at the front and rear of the container; the container must rest evenly across the width in conjunction with the locks; transverse supports are not included in the scope of supply), attachment rail for loading ramps on the rear extension across the entire width, rear extension mechanical with hand crank, extendable by approx. 1500 mm, lockable every 500 mm, including under-run protection with extendable lighting, in the driving lane area with Lohr sheet metal covering, centrally with steel diamond plate, storage space for loading ramps integrated in the rear extension, only usable when the rear extension is extended by approx. 1000 mm, for transporting the ramps with the rear extension retracted - storage space for ramps on the right side in front of the axles.
1 pair of ramps, 3000 mm long, 300 mm wide, load capacity per pair 6000 kg, electric rope winch, 24 volts, pulling force approx. 8165 kg, mounted centrally at the very front, operation with radio remote control, rope length 35 m x approx. 10 mm, with roller rope guide and removable guide rollers.
Axles + Suspension: SAF or BPW drum brake axles, at the manufacturer's choice, air suspension, 1st axle automatic lift axle, additionally electrically operated from the truck, including forced lowering and starting assistance.
Braking system: 2-line compressed air braking system, color-coded line routing for easy servicing, spring-loaded parking brake, 2 fail-safe coupling heads at the front, EBS, electronic braking system with EBS socket at the front, without connection cable, with lifting and lowering valve with quick venting, holding function in lowering position + auto-reset function, vehicle stability system, axle load recognition via EBS-CAN bus signal.
Wheels and tires: 235 / 75 R 17.5", manufacturer's choice, steel rims in twin arrangement.
Rjdpsza Aiyefx Apnou
Electrical system: 24 volts, multi-chamber lights in LED, yellow LED lighting on the sides, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, double LED illuminated and extendable to 3000 mm, 1 additional 7-pole socket (according to ISO 1724) in the under-run protect

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.