Tipper semitrailer

FLIEGL 3-Achs Alu Kipper DHKA 390 - 50m³

The images shown are archive photos. The vehicle may still be in use.

Chassis Tipping Semi-Trailer
Fine-grained steel welded construction in Basic lightweight design, fifth wheel plate with replaceable 2" king pin
Curved front wall (patented)
24 t 2-speed support legs, single-sided operation, with straight base, without compensating rod
2x wheel chocks with holder
Aluminium side underrun protection
Rear under-run protection, foldable
6x half-shell mudguards
Integrated mudguard holders with stone-repellent surface
Tarpaulin rod with bracket
2x rear towing hooks

Axles & Suspension
BPW disc brake axles
"Axle/chassis laser alignment" reduces tyre wear and fuel consumption
Air suspension
1st axle with automatic lift, including forced lowering and starting aid, operated by '3x brake' application

Braking System
2-line compressed air braking system
Colour-coded routing for easy servicing
Spring-type parking brake
2 non-interchangeable coupling heads at the front, without connection line
EBS (Electronic Braking System) with EBS socket at the front, without connection cable
Note: This trailer must only be towed by tractor vehicles that ensure ABS functionality!
With lift & lower valve
Vehicle stability control system

Wheels and Tyres
6x 385/65 R22.5" tyres
6x steel rims

Electrics
24 Volt, multi-chamber lights, side yellow LED lighting
2 white marker lights at front
2 white/red lane marker lights at rear
2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front, without connection cable

Hydraulics
Low-pressure cylinder max. 170 bar, smallest stage hard chrome plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection)

Tipping Body
Bwedpfjy Efcusx Anren
Aluminium box body made of high-quality, abrasion-resistant material
Sloped 5 mm thick front wall with external cylinder mounting
Side walls made of 30 mm hollow chamber profiles, clean welded, with bulk material deflecting top rail. Internal ladder at the front wall
Shovel and broom holders outside front wall
Rear wall with pendulum mounting and 'double-joint' hinges, with 2-winged door split 1/2 to 1/2, upper swing beam, with one grain slide per door
Rear wall with rubber seal
6 mm continuous floor
Standing platform with access, connecting plate for air/electric/brake
Roll tarp can be stowed one side (FR-right), with central locking (FR-left)

Operating Notes
For transporting salt, lime, etc., we recommend a tipping cylinder with a hard chrome-plated piston rod to prevent corrosion and damage from the material.
The total weight stated is technically possible; depending on the cargo, the full weight may not be achievable within the permissible axle/support/saddle loads (incorrect load distribution may result in poor handling and tracking).
Note! Not suitable for chemically aggressive substances (e.g., acids, chlorine compounds, sulphur compounds, alternative fuels); such substances can cause stress corrosion cracking and extreme cracking in the body when combined with moisture on the body surface! Vehicles with load bodies are intended for chemically non-aggressive cargo. Use for transporting aggressive goods such as acids, bases, salts, fertilizers, sewage sludge, and household waste is at the operator's own risk. This can result in damage such as stress corrosion cracking or pitting.

Archive images are shown!

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.