نیمه یدک‌کش با سکوی کاری

FAYMONVILLE MAX Trailer MAX200 Telesattel

You can find our entire vehicle inventory, including immediately and soon-available vehicles, on our website.

The following is an excerpt from the equipment specification. Full equipment details available on request.

Loading Platform:
* Extendable loading platform with pneumatically operated locking mechanism
* 7 pairs of fold-out lashing rings (LC 5,000 daN)
* 3 pairs of fold-out lashing rings (LC 10,000 daN)
* Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN)

Landing Legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)

Axles:
* BPW axles, air-suspended, with disc brakes (approx. 430 mm), fitted with lift/lower function. Technical axle load: 10,000 kg each (ET0)
* Self-steering axle with electromagnetic reverse lock, activated via reverse gear or manually
* Axle tool

Tyres:
* Tyres 385/65 R 22.5
Hfodpfjxgk U Njx Acyjn

Brake System:
* Brake system compliant with EU regulations with EBS-E (2S2M), without connecting lines to tractor unit

Steel Construction:
* Steel construction made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)

Paintwork:
* Premium and durable corrosion protection of the standard shot-blasted welded frame by a two-component (2K) zinc dust primer
* High-quality single-color topcoat (2K) in RAL 3002 carmine red
* Rims in silver
* Rear section metallised and painted in RAL 9010 (pure white)

Including the following additional equipment:
* Yellow-red air couplings on galvanised front connector bar
* 4 wheel chocks with holders
* 2" king pin
* Yellow reflective tape compliant with EU-standard on sides, extension and trailer rear
* European reflector boards (red-yellow) on rear of trailer
* Loading platform with approx. 30 mm thick wooden floor encased in Omega profiles
* 10 pairs of stake pockets for insertable stanchions approx. 100 x 50 mm in the outer frame of the loading platform
* Storage for up to 9 pairs of insertable stanchions approx. 100 x 50 mm bolted to the inside of the front wall
* 1 spare wheel holder under the loading platform on the left in the driving direction, without spare wheel
* One mudflap at the rear of the trailer
* Manual and documentation on USB stick
* Bracket for rotating beacon at the rear of the trailer
* On gooseneck and rear panel, left and right, one holder each for warning signs, including socket
* Speed stickers 80 km/h, rear and both sides
* Load gauge for axle load determination including load chart
* Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high
* 6 pairs of WADER container pockets on loading platform, for 1x 20' container, 2x 20' containers or 1x 40' container flush with the rear
* INOX toolbox, approx. 600 x 350 x 600 mm, under the platform on the left in the driving direction
* 4 pairs of longitudinal stake pocket rails for 80 x 50 mm insertable stanchions mounted on the loading platform
* Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition
* 2 LED reversing lights mounted on rear panel
* HRM metallisation (High Resistance Metallisation)

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.