نیمه یدککش با سکوی کاریFAYMONVILLE
        MAX Trailer MAX200 Telesattel Megatrailer    
 نیمه یدککش با سکوی کاری
FAYMONVILLE
        MAX Trailer MAX200 Telesattel Megatrailer    
                                                     قیمت ثابت به اضافه مالیات بر ارزش افزوده                                            
                                            €۴۹٬۷۵۰                                    
            وضعیت        
            کارکرده                    
            موقعیت        
                                                Essen                                            

 تصاویر نشان میدهند            
 نمایش نقشه            
اطلاعات دستگاه
قیمت و مکان
                             قیمت ثابت به اضافه مالیات بر ارزش افزوده                    
                            €۴۹٬۷۵۰                    
- محل فروشنده:
-     Heegstraße 6-8, 45356 Essen, آلمان             
 تماس بگیرید            
جزئیات فنی
- حداکثر وزن بار:
- ۳۸٬۳۹۰ کیلوگرم
- وزن کل:
- ۴۸٬۰۰۰ کیلوگرم
- پیکربندی محور:
- 3 محور
- ثبتنام اولیه:
- ۰۳/۲۰۲۴
- بازرسی بعدی (TÜV):
- ۰۳/۲۰۲۶
- عرض کل:
- ۲٬۵۴۰ میلیمتر
- تجهیزات:
- اِیبیاِس
جزئیات پیشنهاد
- شناسه آگهی:
- A20421315
- شماره مرجع:
- 33271
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۹.۰۸.۱۴۰۴
توضیحات
        You can find our complete range of vehicles, including immediately and short-term available units, on our website.
Excerpt from the equipment list. Full specification available on request.
- Loading platform in extendable design with pneumatically operated locking mechanism
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
Rodpexth Adefx Adtsch
- 2 pairs of outward-folding lashing rings (LC 10,000 daN)
- JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
- Tyres: 245/70 R 17.5 3PMSF
- BPW axles and suspension
- 2 rigid axles, 1 trailing steered axle
- Air suspension with raise/lower valve
- Brake system in compliance with EU regulations, EBS-E (2S2M)
- Load gauge for axle load measurement, including load chart
- 2-inch kingpin
- One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- Galvanized, extendable width extensions, approx. 230 mm per side
- 6 pairs of WADER container pockets in the deck, suitable for 1x20' container, 2 x 20' containers, or 1 x 40' container flush at the rear
- 10 pairs of stake pockets (approx. 100 x 50 mm) in the outer frame of the deck
- 3 crosswise-mounted stake pocket rails (approx. 100 x 50 mm) on the deck
- One transverse INOX toolbox under the loading platform, approx. 565 x 290 x 810 mm
- Mount for ALU loading ramps, transversely under the platform behind the axles
- Adjustable hanging rails for aluminium loading ramps at the rear of the vehicle
- 2 LED reversing lights mounted on the rear panel
- HRM metallic coating (High Resistance Metallisation) of the outer frame
- Single-colour paint finish in RAL 3002 carmine red
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Excerpt from the equipment list. Full specification available on request.
- Loading platform in extendable design with pneumatically operated locking mechanism
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
Rodpexth Adefx Adtsch
- 2 pairs of outward-folding lashing rings (LC 10,000 daN)
- JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
- Tyres: 245/70 R 17.5 3PMSF
- BPW axles and suspension
- 2 rigid axles, 1 trailing steered axle
- Air suspension with raise/lower valve
- Brake system in compliance with EU regulations, EBS-E (2S2M)
- Load gauge for axle load measurement, including load chart
- 2-inch kingpin
- One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- Galvanized, extendable width extensions, approx. 230 mm per side
- 6 pairs of WADER container pockets in the deck, suitable for 1x20' container, 2 x 20' containers, or 1 x 40' container flush at the rear
- 10 pairs of stake pockets (approx. 100 x 50 mm) in the outer frame of the deck
- 3 crosswise-mounted stake pocket rails (approx. 100 x 50 mm) on the deck
- One transverse INOX toolbox under the loading platform, approx. 565 x 290 x 810 mm
- Mount for ALU loading ramps, transversely under the platform behind the axles
- Adjustable hanging rails for aluminium loading ramps at the rear of the vehicle
- 2 LED reversing lights mounted on the rear panel
- HRM metallic coating (High Resistance Metallisation) of the outer frame
- Single-colour paint finish in RAL 3002 carmine red
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
            توجه:        به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.    
ثبت شده از: 2003
ارسال درخواست
تلفن & فکس
                            +49 201 8... آگهیها                
            آگهی شما با موفقیت حذف شد            
            یک خطا رخ داده است            
















