تریلر کم‌ارتفاع نیمه‌کشنده

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader Radmulden

More vehicles available at

Extract from the equipment. Complete equipment details on request.

Gooseneck:
Gooseneck with beveled front corners approx. 45° and rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick

Loading platform:
* Telescopic loading platform with rear bevel approx. 1,000 mm x 8°
* Between 1st and 2nd axle, one pair of fixed wheel recesses with covers, approx. 1,610 x 700 x 400 mm (L x W x D)
* 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN)
* 4 pairs of fold-out lashing rings (LC 5,000 daN)
* 3 pairs of fold-out lashing rings (LC 10,000 daN)
* Cut-outs on the external frame for attaching tension straps (LC 2,000 daN)
* Incl. 3-piece removable galvanized covers over the wheel recesses – max. point load approx. 3.5 t / piece

Axles:
* BPW axles and suspension, 2 rigid axles, 3rd axle steering
* Technical axle load: 12,000 kg each
* Electromagnetic reversing lock, activated via reverse gear and manually
* Air suspension with lifting and lowering valve
* Axle tools

Tyres:
* Tyres 235/75 R 17.5

Landing legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load)

Brake system:
* Brake system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit

Paintwork:
* HRM metallization (High Resistance Metallisation), complete steel construction blast-cleaned to SA2.5-SA3. Afterwards hot finished with ZINACOR 850 (Zinc 85% - Alu 15%)
* High-quality 2-component (2K) single-color top coat in RAL 3002 carmine red

Accessories included:
* 2" kingpin
* One galvanized steel front wall, approx. 400 mm high
* Galvanized extensions, extendable by approx. 230 mm per side
* Galvanized folding supports under the rear bevel of the loading platform
* A bracket for a beacon at the rear of the trailer
* Plug-in aluminium side walls and rear wall on the gooseneck, approx. 2,440 x 400 mm (L x H), the rear galvanized stanchions are removable (superstructure length approx. 2,560 mm)
* 1 galvanized toolbox, integrated into the beveled gooseneck
* Hardwood bumper on the gooseneck rear wall to the loading platform
* 3 pairs of WADER container pockets in the loading platform for one 20' (30') or one 40' container
* 5 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm on the external frame of the loading platform
* Hardwood extension planks, maximum permissible load on an area of approx. 200 x 200 mm up to approx. 3.5 t
* One galvanized holder for the extension planks, left and right under the loading platform
* Sanded paint layer as anti-slip on the chequer plates, over the kingpin and the loading platform
* 2 LED reversing lights mounted on the rear panel
* 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear
* Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light
* Load pressure gauge for axle load determination including load chart
Guodpfjxfx R Aox Acysh
* 5 pairs of galvanized plug-in stanchions, approx. 100 x 50 mm, approx. 1,000 mm high
* Storage for max. 7 pairs of plug-in stanchions, approx. 100 x 50 mm, on the front wall
* One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, incl. approx. 48 mm thick hardwood covering, incl. electro-hydraulic unit. Ramp with hydraulically folding/unfolding ramp sections. Hydraulic lifting gear and hydraulic lateral movement, maximum load

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.