تریلر کم‌ارتفاع نیمه‌کشنده

FAYMONVILLE MAX Trailer 3+5 Tiefbett (Baggerbett)

You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.

Excerpt from the equipment features. Full specification available upon request.

Gooseneck
Bodpeuvbdtjfx Aahedi
* Hydraulically liftable/lowerable and detachable gooseneck. Length approx. 3,650 mm. Suitable for tractor units: 6 x 4 or 8 x 4

3-Axle Compact Front Bogie
* Hook couplings front and rear, length: approx. 3,560 mm
* Chassis width: approx. 2,850 mm

Excavator Deck
* Telescopic excavator deck BB-A with drive-over deck hooks at the front and a bolt coupling at the rear
* Base width: approx. 2,850 mm, Length: approx. 7,150 mm, Main beam height: approx. 430 mm, Main beam width: approx. 1,350 mm
* Loading height approx. 580 mm with ground clearance approx. 150 mm

5-Axle Rear Bogie
* Mechanical bolt coupling for front connection of a low-bed, rear end traverse
* Chassis width: approx. 2,850 mm
* Chassis length: approx. 6,840 mm
* 3-axle pendulum axle

Front Bogie
* PENDULUM AXLE, all axles hydro-mechanically forced-steered
* Hose rupture valve on axle compensation cylinder with automatic RESET function
* Hydraulic cylinders with shut-off valves and stopper pins for securing in raised position
* Axles finished with 2 layers of MB7350 Novagrau single-colour 2-component paint
* Technical axle load: 14,640 kg per axle (62 km/h)
* Hydraulic axle compensation
* Front bogie tyres: 12 x Manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J, pendulum axle

5-Axle Rear Bogie
* PENDULUM AXLE, all axles hydro-mechanically forced-steered
* Hose rupture valve on axle compensation cylinder with automatic RESET function
* Hydraulic cylinders with shut-off valves and stopper pins for securing in raised position
* Axles finished with 2 layers of MB7350 Novagrau single-colour 2-component paint
* Technical axle load: 14,640 kg per axle (62 km/h)
* Hydraulic axle compensation
* Rear bogie tyres: 20 x Manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J

Paintwork
* HRM metallization of the entire vehicle chassis using ZINACOR 850 (85% zinc/15% aluminium) to ensure the best possible corrosion protection
* Final coat with two layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, according to the RAL System 841GL. Rims in silver grey

Incl. Accessories
* Steel front wall, approx. 400 mm high
* Detachable ALU side walls and rear wall approx. 400 mm high in anodized finish, mountable on the gooseneck
* 3.5" kingpin
* BEKA-MAX central lubrication system for one gooseneck
* Multi-coupling hydraulic connections on the gooseneck
* BEKA-MAX central lubrication system for one 3-axle bogie
* One 7-pin socket left and right rear on the front bogie for warning signs
* Screw-in option (ø approx. 40 mm) every approx. 500 mm on the outside of the upper flange of the external tube of the excavator deck for lashing rings (LC 16,000 daN)
* Folding extensions with steel mattress, width adjustable from approx. 2,850 mm to approx. 3,250 mm
* Steel mattresses can be positioned in 2 ways to achieve a lowered loading platform. Load capacity depends on extension, refer to the respective load chart
* Steel mattresses with rubber flooring approx. 12 mm thick
* One 7-pin socket left and right, front and rear of the rear bogie for warning signs
* BEKA-MAX central lubrication system for one 5-axle bogie
* Socket on the rear bogie for cable remote control of rear steering
* Rear bogie with trough
* Two INOX toolboxes, approx. 855 x 340 x 390 mm, mounted on the goos

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.