Cycle-controlled lathe

FAT-HACO TUR 800 MN

FAT-HACO / TUR 800 MN / Year of construction: 2001 / General overhaul in 2009, Replacement in 2010

The TUR MN lathe - cycle controled is a combination of a conventional and a CNC lathe.
The TUR MN is a production machine for complex parts as a single piece
or in small quantities with high precision.

The machine can be inspected in the factory under power by appointment.
Condition: Fully functional / ready for use.

The general overhaul in 2009 included the following work:
- Machine completely dismantled, cleaned and remounted,
- Maintenance of the gear box, - Machine bed have been grinded,
- Upper bed has been scraped by hands, - Measuring and adjusting the headstock
- Measuring and adjusting the plan and longitudinal slide

Replacement in 2010: Ball screw renewed.

TECHNICAL SPECIFICATIONS:
- Control: SIEMENS SINUMERIK 840D ManualTurn

- Swing diameter over bed max.: 800 mm
- Swing diameter over support max.: 480 mm
- Distance between centers (turning length)max.: 4.000 mm
- Centre height: 250 mm

Headstock:
- Spindle cone (metric cone): 150
- Bore through the spindle: 140 mm
- Spindle speed: 5 - 1.800 rpm
- Spindle speed I: 5 -360 rpm
at N = const.: 90 - 360 rpm
- Spindle speed II: 360 - 1.800 rpm
at N = const.: 360 - 1.800 rpm

Feeds:
Type of the feed drives - servo drives:
- Gradient of the leading spindle (Z/X): 10 mm
- Range of the longitudinal feeds (Z/X): 0 - 6.000 mm/min
- Feed force of the longitudinal feed (Z) max.: 15.000 N
- Feed force of the crossfeed (X) max.: 10.000 N
- Adjustment range of the cross slide (X): 480 mm

- Range of the bedway: 544 mm

Hsdpfxszamkze Am Don
Cross slide:
- Width of the cross slide: 330 mm

Tailstock:
- Permitted workpiece weight max.: 3 tons
- Tailstock quill - morse taper: 6 MT
- Diameter of the tailstock quill: 125 mm
- Tailstock sleeve stroke manuell: 280 mm

Drive motor feed rate for X/Z-axis:
- Nominal torque Mn = 15,5 Nm
- Nominal speed Nn = 3.000 rpm

Total power requirement: 39,5 kW
Machine weight approx.: 9,3 tons

Dimensions of the machine:
Length: 8.000 mm (incl. chip conveyor which can be dismantled, then it`s
approx. 1.400 mm shorter)
Width: 2.500 mm
Height: 2.200 mm

SPECIFICATIONS / ACCESSORIES:
- 1 steady rest, Ø: 30 - 340 mm
- Documentation

Without guarantee of completeness and correctness of the technical information
and the equipment. - Subject to prior sale -