FANUC ROBODRILL α-D21LiB

FANUC ROBODRILL α-D21LiB

This 3-axis FANUC ROBODRILL α-D21LiB was manufactured in 2018. It features an impressive X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine includes a robust clamping area of 850 × 410 mm and a maximum workpiece weight of 250 kg. If you are looking to get high-quality machining capabilities, consider the FANUC ROBODRILL α-D21LiB vertical machining centre we have for sale. Contact us for further details.

Travels and speeds
• Rapid traverse (X/Y/Z): 48 m/min
• Feed rate (X/Y/Z): 1–15,000 mm/min
Nwodpfx Aez E Sthenksl
• Interference radius: 380 mm
• Spindle nose to table: 350–680 mmTable
• Clamping area: 850 × 410 mm
• T-slots: 3
• T-slot width: 14H14 mm
• T-slot spacing: 125 / 250 mm
• Table height from floor: 815 mm
• Max. workpiece weight: 250 kgSpindle
• Spindle bearing diameter: 50 mm
• Max. torque: 35 Nm (100% duty)Tool magazine
• Stations: 21
• Max. tool diameter: 80 mm
• Max. tool length: 200 mm
• Tool clamping force: 2,200 N
• Max. tool weight: 2 kg/tool
• Total tool mass: 23 kgCutting capacity
• Max. metal removal rate: 600 cm³
• Max. drilling diameter: 20 mm
• Max. tapping: M16Feed forces
• X-axis: 2,700 N
• Y-axis: 2,700 N
• Z-axis: 5,400 NElectrical
• Voltage/Frequency: 400 V / 50 Hz
• Connected load: 22 kVA
• Power requirement: 17.6 kWUnits available and runtimes
• Unit 1
• FANUC S/N: P182ZL013
• STAMA S/N: KMM 021.1705
• Runtime: 400 h 20 min 5 sec
• Unit 2
• FANUC S/N: P1827L014
• STAMA S/N: KMM 021.1704
• Runtime: 29,444 h 47 min 12 sec

Additional equipment

• KNOLL KF 200/950 cooling unit
• Unit 1 S/N: 1347674
• Unit 2 S/N: 1347675
• KNOLL 300 K-1 chip conveyor
• Unit 1 S/N: 1347673
• Unit 2 S/N: 1347676

Technical Specification
Taper Size SK 30