Mesh welder

EVG IM-QC 72

Basic Information
Number: 13921
Control System: Siemens S7-400
Technical Details
Materials processed to date: bare and galvanized wires
Intended use: Production of fencing and industrial mats
Technical condition: The system was in production until January 5, 2026, disassembled and stored
Longitudinal wire diameter min: 2 mm
Longitudinal wire diameter max: 6 mm
Transverse wire diameter min: 2 mm
Transverse wire diameter max: 6 mm
Cycles (transverse wires) min/max: 120
Maximum mat width: 1700 mm
Longitudinal wire feed: pre-aligned rods
Transverse wire feed: pre-aligned rods
Longitudinal wire spacing min: 25 mm
Transverse wire spacing min: 12.5 mm
Transverse wire spacing max: 1500 mm
Number of welding transformers: 8
Number of welding presses: 41
Maximum welding width: 1600 mm
Maximum mat length: 3000 mm
Mat cutting shear: present
Mat stacker: present
Transverse wire magazine: present
Drive power: 122 kVA
Total connection power: 900 kVA
Operating voltage: 3x400 V
Frequency: 50 Hz
Control voltage: 230 / 24 V

Electrical cabinet: present

Additional data:

The system consists of:

Dsdezb Nx Ropfx Aikekn
GRID WELDING MACHINE IM-QC/72
Longitudinal wire MAGAZINE
Longitudinal wire DISTRIBUTOR
Longitudinal wire FEEDING MACHINE IM-ZL/72
Strip and EDGING MACHINE Q 5H/72
MAT CUTTING SHEAR L 1/72
MAT TRANSPORTER LT-PV/72
MAT STACKER SHR/72

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.