نیمه یدک‌کش با سکوی کاری

ES-GE 2-Achs-SAH, zwangsgelenkt, pneum. Heckausschub

You can find our complete stock of immediately and short-term available vehicles on our website.

Excerpt from the equipment list. Full equipment details available on request.

Chassis:
* Welded structure made from high-quality steel profiles with through cross members, designed for high point loads

Rear extension:
* Pneumatically extendable loading platform by approx. 1,000 mm, including underrun protection, locking positions every 200 mm

Coupling device:
* Fifth wheel plate with 2-inch kingpin

Landing legs:
* 2 x 12 t landing legs with compensating foot and single-sided operation on the right in the direction of travel

Axles:
* 2 x 10 t air suspension axle units, SAF brand, with disc brake approx. 430 x 45 mm, center bolt wheel fixing, offset 120 mm
* ABS
* Total air suspension travel approx. 180 mm, lift approx. 110 mm, lower approx. 70 mm
* Air suspension control via manual regulator with stop function

Steering:
* Last axle is forcibly steered

Brake system: Wabco brand
* Two-line compressed air brake system according to EC regulations with EBS and RSS, automatic load-dependent control
* Spring-loaded cylinders as parking brake
* Mix-up proof coupling heads permanently mounted on the front cross member, without connecting line to towing vehicle

Tyres:
* 4 x 385/65 R22.5 164K, on rim 11.75 x 22.5 ET 120 - brand at our discretion

Mudguards:
* According to EC regulations, 1/4 PVC mudguards in front of and behind the axle assembly

Spare wheel holder:
* 1 double basket with fixing material for one spare wheel with ET 120

Load securing:
* 8 pairs of foldable lashing rings, evenly distributed (pulling force approx. 8.0 t)
* 7 pairs of foldable lashing rings, evenly distributed (pulling force approx. 2.5 t)
* In the outer frame, a bore hole every approx. 500 mm for lashing straps

Stake pockets:
* 8 pairs of stake pockets in the outer frame, evenly distributed
* 4 rows of stake pockets across the loading area

Insertable stakes:
* 20 insertable stakes made of galvanized pipe approx. 80/50 mm, total length approx. 1,000 mm
* Interior front wall magazine for 20 insertable stakes

Front wall:
* Bolted corner stakes, filled with aluminum hollow profiles, inner lining with approx. 9 mm phenolic plywood (approx. 1,250 mm high)

Floor:
* Approx. 28 mm Z-hardwood floor, recessed into the outer frame

Lighting system:
* According to EC regulations, 24 volt with multi-chamber lights
* LED side marker lamps
* LED front position lights (white)
* LED rear outline marker lamps
* License plate lights
* 1x 15-pin and 2x 7-pin plug connectors on the front cross member

Equipment:
* Warning sign according to ECE 70
Codpjwx Dddjfx Afnerh
* Working spotlight on the lamp carrier (switched via reverse gear)
* Holder for rotating beacon at the rear, incl. rotating beacon
* 2 x PVC toolboxes

Paintwork:
* Chassis and front wall sandblasted and high-quality finished (single color)
* Single-color finish in RAL shade of choice

Contour marking:
* According to EC regulations, yellow on the sides and rear (with ESGE logo)

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.