Press brakeErmak
CNC-HAP 3100x135t
Press brake
Ermak
CNC-HAP 3100x135t
VB به اضافه مالیات بر ارزش افزوده
€۷۲٬۲۰۰
سال ساخت
۲۰۲۶
وضعیت
جدید
(کاملاً عملیاتی)
موقعیت
Ahaus 

اطلاعات پایه
- نام دستگاه:
- Press brake
- تولید کننده:
- Ermak
- مدل:
- CNC-HAP 3100x135t
- سال ساخت:
- ۲۰۲۶
- وضعیت:
- نو
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
VB به اضافه مالیات بر ارزش افزوده
€۷۲٬۲۰۰
- اجاره:
- امکانپذیر است
- موقعیت:
- Harmate 43, 48683 Ahaus, Deutschland

تماس بگیرید
جزئیات فنی
ابعاد و وزن
وزن کل:
۸٬۶۵۰ کیلوگرم
طول کل:
۴٬۲۵۰ میلیمتر
عرض کل:
۲٬۰۵۰ میلیمتر
ارتفاع کل:
۲٬۸۰۰ میلیمتر
فاصله بین پایهها:
۲٬۶۰۰ میلیمتر
ارتفاع میز:
۹۰۰ میلیمتر
سیستم هیدرولیک
ظرفیت مخزن روغن:
۲۰۰ ل
تجهیزات
ابزار پایین
ابزار فوقانی
ویژگیهای ایمنی
توقف اضطراری
مانع نور ایمنی
مستندسازی و گواهینامه
مستندات / راهنما
نشان CE
گيج پشتی
سرعت تکیهگاه عقب محور R:
۱۸۰ میلیمتر/ثانیه
مسافت حرکت گیره پشتی محور R:
۲۵۰ میلیمتر
مشخصات محور
مسافت جابجایی محور X:
۸۰۰ میلیمتر
جزئیات بیشتر
تولیدکننده کنترلر:
DELEM
مدل کنترلر:
CNC-Steuerung DA-58T-Touch
عرض کار:
۳٬۱۰۰ میلیمتر
حداکثر نیروی خمشی:
۱۳۵ t
طول کورس (ضربه):
۲۷۵ میلیمتر
عمق گلو:
۴۱۰ میلیمتر
نوع کنترل:
کنترل CNC
نوع تحریک:
هیدرولیک
جزئیات پیشنهاد
- شناسه آگهی:
- A23327879
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۱.۰۸.۱۴۰۵
توضیحات
Brand new, hydraulic ERMAK bending press, 3-axis model, CNC-HAP 3100x135t POWER-BEND - CNC control DELEM DA 58 touch - manual crowning
- synchronized
- front light barrier AKAS-Laser Safety
fast X-axis, R axis possible
standard equipped with three automatically controlled axes. The positioning of the vertical axes (Y1, Y2) is done hydraulically. The back gauge (X) is moved by an electric motor at a speed of 230 mm/s. Two precise
ball screws ensure very accurate positioning. Optionally, a fourth machine axis (R) with a fast-running servo drive is available.
- 2D graphical touch-screen programming
- 15“ color TFT with high resolution
- bending sequence calculation
- crowning control
- servo and frequency converter control
- advanced algorithms for Y-axis control for valves with closed or open loop
- USB, peripheral interface
- Profile-58TL offline software
Standard equipment:
- upper tool segments 835 mm, special steel, hardened
- lower tool 60x60, four bending channels, special steel, hardened
- upper tool holder with PROMECAM quick-change system
- CNC linear scales Y1/Y2
- CNC-controlled back gauge, X-axis with AC drive
- individual models with crowning device
- CE safety devices
- support arms with scale and T-slot
- swiveling control panel DELEM ER 70
- CNC control ER 70
Hnsde Ai Sfiepfx Apdow
- mobile control panel with foot trigger and emergency stop button
- operating manual / CE
Optional accessories:
- WILA manual crowning
- CNC WILA crowning, calculation based on pressing force
- dynamic two-axis back gauge X/R with servo drive
- upper and lower tool clamping system hydraulic
- upper tool clamping system pneumatic
- upper and lower tools WILA
- light barrier AKAS Laser Safe
- special design with increased throat depth on request
The synchronization tolerance is only ± 0.01 mm.
TECHNICAL DATA:
Speed X-axis servo drive: 230 mm/s
Rapid traverse Y-axis: 200 mm/s
Speed Y-axis: 10 mm/s
Retraction Y-axis: 120 mm/s
Speed X-axis AC motor: 230 mm/s
Back gauges: 2 pcs
Support arms: 2 pcs
Motor power: 11000 W
Column distance: 2600 mm
Installation height: 550 mm
Table width: 90 mm
further features
- high quality standards, robust industrial models with high edge accuracy from state-of-the-art production
- welded, stress-free monoblock steel construction with very good vibration damping
- S275 material with very high tensile strength, high-quality BOSCH-REXROTH or HOERBIGER hydraulic system
- powerful hydraulic cylinders, honed and chrome-plated, CNC control ER 70 with 2D graphics display and bending simulation
- Y1/Y2: CNC-controlled vertical axes with automatic positioning on linear scales, synchronization tolerance ± 0.01 mm
- X: CNC-controlled back gauge, AC drive with ball screw, linear guide tolerance of the back gauge finger ± 0.01 mm
- bending tool made of high-alloy, hardened special steel
- control cabinet with cooling system, SIEMENS electrical components
- installed safety by side panel cover
- emergency stop button on the control unit and on the control panel
- upper tool holder with PROMECAM quick-change system
- upper tool made of easily exchangeable standard segments 835 mm
- lower tool 60x60 with four V-bending channels
- adjustable support arms with scale and T-slot
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
- synchronized
- front light barrier AKAS-Laser Safety
fast X-axis, R axis possible
standard equipped with three automatically controlled axes. The positioning of the vertical axes (Y1, Y2) is done hydraulically. The back gauge (X) is moved by an electric motor at a speed of 230 mm/s. Two precise
ball screws ensure very accurate positioning. Optionally, a fourth machine axis (R) with a fast-running servo drive is available.
- 2D graphical touch-screen programming
- 15“ color TFT with high resolution
- bending sequence calculation
- crowning control
- servo and frequency converter control
- advanced algorithms for Y-axis control for valves with closed or open loop
- USB, peripheral interface
- Profile-58TL offline software
Standard equipment:
- upper tool segments 835 mm, special steel, hardened
- lower tool 60x60, four bending channels, special steel, hardened
- upper tool holder with PROMECAM quick-change system
- CNC linear scales Y1/Y2
- CNC-controlled back gauge, X-axis with AC drive
- individual models with crowning device
- CE safety devices
- support arms with scale and T-slot
- swiveling control panel DELEM ER 70
- CNC control ER 70
Hnsde Ai Sfiepfx Apdow
- mobile control panel with foot trigger and emergency stop button
- operating manual / CE
Optional accessories:
- WILA manual crowning
- CNC WILA crowning, calculation based on pressing force
- dynamic two-axis back gauge X/R with servo drive
- upper and lower tool clamping system hydraulic
- upper tool clamping system pneumatic
- upper and lower tools WILA
- light barrier AKAS Laser Safe
- special design with increased throat depth on request
The synchronization tolerance is only ± 0.01 mm.
TECHNICAL DATA:
Speed X-axis servo drive: 230 mm/s
Rapid traverse Y-axis: 200 mm/s
Speed Y-axis: 10 mm/s
Retraction Y-axis: 120 mm/s
Speed X-axis AC motor: 230 mm/s
Back gauges: 2 pcs
Support arms: 2 pcs
Motor power: 11000 W
Column distance: 2600 mm
Installation height: 550 mm
Table width: 90 mm
further features
- high quality standards, robust industrial models with high edge accuracy from state-of-the-art production
- welded, stress-free monoblock steel construction with very good vibration damping
- S275 material with very high tensile strength, high-quality BOSCH-REXROTH or HOERBIGER hydraulic system
- powerful hydraulic cylinders, honed and chrome-plated, CNC control ER 70 with 2D graphics display and bending simulation
- Y1/Y2: CNC-controlled vertical axes with automatic positioning on linear scales, synchronization tolerance ± 0.01 mm
- X: CNC-controlled back gauge, AC drive with ball screw, linear guide tolerance of the back gauge finger ± 0.01 mm
- bending tool made of high-alloy, hardened special steel
- control cabinet with cooling system, SIEMENS electrical components
- installed safety by side panel cover
- emergency stop button on the control unit and on the control panel
- upper tool holder with PROMECAM quick-change system
- upper tool made of easily exchangeable standard segments 835 mm
- lower tool 60x60 with four V-bending channels
- adjustable support arms with scale and T-slot
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2018
۱۰ آگهیهای آنلاین
ارسال درخواست
تلفن & فکس
+49 2561 ... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است
















