CNC turn-mill centerEMCO
TURN E65

اطلاعات دستگاه
- نام دستگاه:
- CNC turn-mill center
- تولید کننده:
- EMCO
- مدل:
- TURN E65
- شماره دستگاه:
- R65EW1851
- سال ساخت:
- ۲۰۰۸
- وضعیت:
- نیازمند تعمیر (کارکرده)
- قابلیت عملکرد:
- غیرفعال
- ساعات کارکرد:
- ۹٬۰۰۰ h
جزئیات فنی
- طول تراشکاری:
- ۵۲۰ میلیمتر
- قطر تراشکاری بر روی کشویی عرضی:
- ۳۶۰ میلیمتر
- قطر تراشکاری:
- ۶۰۰ میلیمتر
- مسافت جابجایی محور X:
- ۲۱۰ میلیمتر
- مسافت حرکت محور Z:
- ۶۱۰ میلیمتر
- حداکثر سرعت چرخش:
- ۴٬۲۰۰ دور/دقیقه
ارائه
- موقعیت:
- Sankt Gallen, سوئیس
– فاصله: حدود ۴٬۰۶۳ کیلومتر
- در دسترس بودن:
- بلافاصله پس از پایان حراج
- شرایط تحویل:
- FCA
رایگان
رایگان
توضیحات
No reserve price - guaranteed sale at the highest bid!
Nimble and precise machine with a wide range of accessories, driven tools and collet chucks with various collets, including square and hexagon.
Condition: Used machine, previously used in Thailand. Due to the local climatic conditions, the machine shows external signs of use. The pneumatics show signs of wear, especially from the distributor: brittle hoses, some broken. It is not possible to assign the hoses from the distributor valve without a diagram. The pneumatics must be repaired.
TECHNICAL DETAILS
Swing diameter over bed : Ø 600 mm
Swing diameter over cross slide : Ø 360 mm
Distance between main spindle (clamping flange) and tailstock center : 680 mm
Max. turning diameter : Ø 310 mm
Max. part length : 520 mm
Max. rod diameter : Ø 65 mm
travel ranges
Travel X : 210 mm
Travel Z : 610 mm
main spindle
Spindle connection according to DIN 55026 : KK 6
Spindle outer diameter in the front bearing : Ø 100 mm
Spindle bore : Ø 73 mm
Hollow clamping cylinder with drawbar, max. passage : Ø 66.5 mm
Max. chuck size : Ø 250 mm
AC motor, power (100%, 60% ED) : 15 / 18 kW
Speed range (infinitely adjustable) : 60 - 4,200 rpm
Max. torque : 192 Nm
tailstock
Automatic tailstock : hydraulically operated
Tailstock travel : 500 mm
Max. tailstock pressing force : 8,000 N
Travel speed : 20 m/min
Inner taper of the tailstock quill : MK 4
feed drives
Rapid traverse speed X/Z : 24 / 24 m/min
Feed force X : 5,000 N
Feed force Z : 7,000 N
Acceleration time from 0 to rapid traverse : 0.2 s
Position scatter (according to VDI 3441 in X/Z) : 3 / 5 µm
C-axis (spindle 1 and 2)
Resolution of the rotary axis : 0.001°
rapid traverse : 1,000 rpm
Spindle indexing (disc brake) : 0.01°
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
پرداختها
- هزینههای جانبی خرید:
- ۱۸ %
- شرایط پرداخت:
- ۱۰۰٪ پیشپرداخت
- روشهای پرداخت:
انتقال بانکی
جزئیات پیشنهاد
- شناسه آگهی:
- A18306781
- شماره مرجع:
- AUC-2501095
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۱.۱۱.۱۴۰۳
- پیشنهاد انحصاری:
- فقط در مزایده موجود است
بازدید
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of ۱۸ % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.