CNC turning and milling center

EMCO Maxmill 350

MAXXMill 350
[ Technical Data ]

Travel and Tolerances
Travel X-axis: 350 mm
Travel Y-axis: 250 mm
Travel Z-axis: 300 mm
Distance spindle nose – table surface (min. - max.): 70 / 370 mm
Swivel range B-axis: +/-100°
Rotary range C-axis (rotary table): 0 – 360°

Feed
Rapid traverse X-Y-Z axis: 30 m/min
Max. rotational speed B-axis: 20 rpm
Max. rotational speed C-axis: 25 rpm
Max. motor feed force X-axis: 3000 N
Max. motor feed force Y-axis: 3000 N
Max. motor feed force Z-axis: 3000 N
Max. acceleration X-Y-Z-axis: 4 / 3 / 3 m/s²

Swiveling Rotary Table
Table diameter: 400 mm
Table height from floor: 860 mm
Number of T-slots: 5
Slot spacing: 75 mm
Slot width: 14 mm
Max. permissible workpiece weight (evenly distributed): 50 kg

Main Spindle (mechanical spindle)
Spindle speed: 50 – 12,000 rpm
Max. torque: 33 Nm (S6)
Max. power: 7 kW (S6)
Tool taper: ISO 30 DIN 69871
Pull stud: DIN 69872A
Direct drive with coupling

Tool Magazine
Number of tool stations: 20 (30, 50) ISO 30; 30 (50) HSK-A40
Tool change concept: changing arm
Tool management: random
Tool change time (tool-to-tool): 2 sec
Dkodpex H T Eyofx Alysl
Max. tool diameter: 63 mm
Max. tool diameter (without adjacent tool): 100 mm
Max. tool length: 200 mm
Max. tool weight: 5 kg
Max. drum load weight: 60 / 70 / 100 kg

Coolant System
Coolant tank capacity: 120 l
Standard coolant pressure: 2 bar
Max. delivery rate at 2 bar: 40 l/min

Pneumatics
Min. supply pressure: 6 bar
Min. supply volume: 200 Nl/min

Lubrication System
Spindle: grease
Roller guide: oil / central lubrication
Ballscrew: oil / central lubrication

Dimensions
Overall height: 2300 mm
Installation area (W x D): 1630 x 2300 mm
Weight: 3800 kg

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.