CNC lathe

EMCO EMCOTURN E45-2021 / 4.393 h - neuwertig!

NEW: EMCO EMCOTURN E45 (Year 2021) CNC Lathe – FANUC 0i-TF, 4,393 hours, like new condition!
Includes a parts collection device for the removal of finished parts.

• Manufacturer: EMCO (Made in Austria)
• Model: EMCOTURN E45
Ljdpfx Ahszkhuheysaf
• Year of Manufacture: 2021
• Serial Number: S4E213351
• Control: FANUC 0i-TF incl. handwheel
• Operating Hours: 4,393 hours (see image 263.599 minutes = 4,393 hours)
• Machine Type: Single-spindle lathe with parts collection device
• Number of Tool Positions: 12-position VDI-30 axial turret with two hole patterns
• Condition: Like new, fully functional
• Location: Graz
• Availability: Immediately available from stock
• PICTURES/VIDEOS: Additional pictures and videos of the running machine will be provided upon request.
_____
Item Description
For sale is a high-precision CNC turning center, the EMCO EMCOTURN E45, manufactured in 2021, with low operating hours of only 4,393, and in very good condition.

Special features:
• Control: Modern FANUC 0i-TF control for easy programming, including handwheel
• Parts collection device: The parts collection device (parts catcher) of the EMCO EMCOTURN E45 CNC lathe gently transports finished workpieces out of the working area and automatically drops them into a finished parts container.
• Powerful main drive: Single-spindle configuration with a substantial 13 kW drive power and a maximum speed of 6,300 rpm.
• Tool changer: Fast 12-position axial turret (VDI 30) with a turret indexing time of only 0.14 seconds.
• Quality components: High-quality, robust control cabinet from RITTAL for maximum reliability of the electronics.
_____
Technical Data:

Working area and travels:
• Swinging diameter over bed: 430 mm
• Swinging diameter over cross slide: 300 mm
• Distance between centers: 670 mm
• Max. turning diameter with axial turret: 220 mm
• Max. part length: 480 mm
• Max. bar diameter: Ø 45 mm
• Slide travels (X / Z): 160 / 510 mm

Main spindle and drive:
• Speed range: 0 – 6,300 rpm
• Drive power, main spindle: 13 kW
• Torque at the spindle: 78 Nm
• Spindle connection: DIN 55026 KK 5
• Spindle bearing (inner diameter) / Spindle bore: 80 mm / 53 mm

Tool turret (axial VDI 30):
• Number of tool positions: 12-position VDI-30 axial turret with two hole patterns
• Tool shank according to VDI (DIN 69880): VDI 30
• Tool cross-section for square tools: 20 x 20 mm
• Shank diameter for drill rods: Ø 32 mm
• Turret indexing time: 0.14 sec

Feed drives and accuracy:
• Rapid traverse rate (X / Z): 24 / 30 m/min
• Feed force (X / Z): 4,000 N / 6,000 N
• Acceleration time from 0 to rapid traverse (X / Z): 0.1 sec
• Positional accuracy according to VDI 3441 (X / Z): 2 / 2 µm
_____
Scope of supply & terms of sale:
• CNC lathe EMCO EMCOTURN E45
• Tools: The tools shown in the pictures are included.
• FANUC operating manuals and machine documentation
• Loading by forklift on site is included.

The machine is immediately available and can be viewed and tested under power after prior appointment. Subject to prior sale and errors.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.