Lead/traction spindle lathe

Emco EMCOMAT-17 D

Emcomat 17D Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C New from Training Workshop Excellent Condition!!!

Technical Data:

>> Year of manufacture: approx. 2000
>> Machine no.: D3F H1 010
>> Centre height: 170 mm
>> Swing over bed: 340 mm
>> Swing over cross slide: 190 mm
>> Turning length: 700 mm
>> Spindle speed: 4 speed ranges, stepless from 35 to 3000 rpm
>> Tailstock quill stroke: 120 mm
>> Tailstock: MT3
>> Spindle bore: 50 mm
>> 20 longitudinal feeds: 0.045 – 0.787 mm/rev
Bsdjwvuf Tspfx Af Djld
>> 20 cross feeds: 0.023 – 0.406 mm/rev
>> Required floor space approx. (L x D x H): 1.600 x 0.9 x 1.3 meters
>> Weight: approx. 730 kg

Equipment and Accessories:
>> 3-axis digital readout from K&C, new, with 12 months manufacturer’s warranty and operating manual
Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching
>> 1 piece three-jaw chuck NEW 160 mm, 2 sets of jaws
>> Multifix B toolholder with 2 tool pockets
>> Chip guard
>> Coolant system

About the machine:

Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is of course fully functional. The bedways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new three-jaw chuck. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.