EMCO Concept Turn 55

EMCO Concept Turn 55

Horizontal turning machine manufactured in 2006. This EMCO Concept Turn 55 features a maximum turning diameter of 52 mm and a maximum part length of 215 mm. It includes a tool turret with 8 positions and a spindle speed range of 120–4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMCO Concept Turn 55 machine we have for sale. Contact us for further details.

• Working area
• Swing over bed: 130 mm
• Swing over cross slide: 60 mm
• Maximum turning diameter: 52 mm
• Maximum part length: 215 mm
• Spindle/Workholding
• Spindle connection: factory standard
• Spindle bore: 16 mm
• Chuck diameter: 74 mm
• Through hole in chuck: 15 mm
Fpedpsy H Etcefx Ac Dji
• Automatic chuck diameter: 76 mm
• Mechanical speed steps: 2
• Maximum torque: 14 Nm
• Tooling
• Tool turret positions: 8
• Tool holders (internal/external): 4/4
• Tool shank size: 12 x 12 mm
• Boring bar diameter: 10 mm
• Feeds/Drives/Accuracy
• Feed drives: 3-phase stepper motors; resolution 0.0005 mm
• Rapid traverse X/Z: 2 m/min
• Working feed X/Z: 0–2 m/min
• Feed force X/Z: 1000 N
• Position scatter X: 0.008 mm
• Position scatter Z: 0.008 mm
• Tailstock
• Quill stroke: 35 mm
• Quill diameter: 22 mm
• Taper: MK1
• Automatic tailstock quill stroke: 15 mm
• Lubrication
• Guideways: oil
• Other lubrication points: grease
• Pneumatics
• Supply pressure: 6 bar
• Connection: 10 mm
• Electrical
• Power supply: 115/230 V
• Voltage tolerance: +5/-10 %
• Frequency: 50/60 Hz
• Max fuse: 12 A
• Dimensions/Weight/Noise
• Axis height above floor: 320 mm
• Footprint: 840 x 695 mm
• Sound pressure level: 65 dB(A)
• Slight corrosion on machine components (common for comparable machines)
• 4+4 station tool turret
• Tailstock MK1 including quill and center point
• 3-jaw chuck installed, no additional jaw sets included
• Collets available, but no collet chuck
• No drill chuck (MK1) and no drill bits included
• Tools available as shown in images
• 5.5 mm Allen key included
• Siemens Sinumerik 810/840D Turn/Mill control (PC & CD)
• License key included, likely transferable
• Operating manual and machine documentation included
• Data carriers included

Technical Specification
Driven Tools No
Counter Spindle No