4-axis bar machining center

elumatec SBZ 140

Special Features:
Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS
Water-cooled spindle, 9.5 kW S1
3-layer machining possible
Carefully cleaned and overhauled – excellent condition

Description:
Graphical operator guidance and graphical service support
A-axis for stepless machining from above – swivel angle 180°
HSC milling spindle for speeds up to 24,000 rpm
Large machining width
Standard with clamping detection and automatic clamp positioning
8 tool stations
Complete profile machining with stationary profile bar
Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis
Robust, low-wear direct drive
Protective hood
Digital axis controllers for all 4 axes with high-resolution measuring system
4-axis industrial PC control
2 1/2 D interpolation
15" TFT color screen
Network connection RJ45 10/100 MBit
Hard disk
Full PC keyboard
Remote maintenance via TCP/IP (requirement: internet access)

Technical Specifications:

Max. machining length without frontal machining: 7,600 mm
Max. machining length with frontal machining: 7,500 mm (tool-dependent)
Travel X-axis: 7,700 mm
Travel speed X-axis: 65 m/min
Travel Y-axis: 850 mm
Travel speed Y-axis: 60 m/min
Travel Z-axis: 650 mm
Travel speed Z-axis: 60 m/min
Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180°
Positioning accuracy:
X-axis: +/- 0.1 mm / 1 m
Y-axis: +/- 0.1 mm
Z-axis: +/- 0.1 mm
A-axis: +/- 0.1°
Max. spindle speed: 24,000 rpm
Max. spindle power: 9.5 kW S1
Tool holder: HSK F 63
Max. cutter diameter: 80 mm
Max. milling cutter diameter: 200 mm
Compressed air connection: > 7 bar
Voltage: 400 V, 3 PH, 50 Hz
Fuse: 35 A
8 tool stations

Included Accessories:
Tool setting gauge
8 pneumatic material clamps
Automatic clamp detection
Dosing spray device
Protective hood
Front light barrier
Side safety fences (left and right)
Central chip extraction
Hfodjy Ah Tkspfx Af Esf
2 pneumatic material stops
3-circuit clamping system

Length measurement for profile bar
Barcode scanner with wireless transmission
Special version with light barrier

Additional options available on request:
Programming software (office) eluCad, incl. hotline contract for 6 months
3D import license for one machine of category "L"
Data import license package for one machine of category "L"
CSV import license for one machine of category "L"
Macro hashing license for one machine of category "L"

Other information:
The machine is delivered ready for transport, including transport locks, loaded onto truck

Additionally, we optionally offer the following services on request:
Installation and commissioning
Machine training
4/5-axis training package for machine and eluCad

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.