DOOSAN PUMA MX3100

DOOSAN PUMA MX3100

This 7-axis DOOSAN PUMA MX3100S was manufactured in 2012. It features an impressive maximum turning diameter of 760 mm and a turning length of 1,500 mm. The machine is equipped with a 40-tool Capto C6 automatic tool changer and offers high spindle speeds of up to 12,000 rpm. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA MX3100S horizontal turning machine we have for sale. Contact us for further details.

• Bed: Cast iron with linear roller guides on all axesLeft spindle (main)
• Spindle nose: ASA A2-11
• Chuck: Hydraulic 3-jaw, Ø315 mm
• Max available power from: 238 rpm
• Max torque: 1,003 / 1,203 Nm
• Built-in spindle motor; front bearing Ø160 mm
• Spindle bore: 115 mm; draw tube ID: 103 mm
• C1 positioning: continuous/interpolated, 0.001° resolution, hydraulic spindle lockingRight spindle (sub)
• Spindle nose: ASA A2-8
• Chuck: Hydraulic 3-jaw, Ø254 mm
• Speed: 40–4,000 rpm
• Motor power (low/high electronic range): 15/22 kW | 22/26 kW
• Max available power from: 450 rpm
• Max torque: 398 / 539 / 700 Nm
• Built-in spindle motor; front bearing Ø130 mm
• Spindle bore: 86 mm; draw tube ID: 77 mm
• C2 positioning: continuous/interpolated, 0.001° resolution, hydraulic spindle lockingAxis travels
• B (upper turret rotation): 240° (±120°)
• A (right spindle translation): 1,550 mm
• C1/C2 (spindle rotation): ±360°Rapid traverse / feeds
• X1 / Z1 / Y: 36 / 36 / 26 m/min
• A axis: 30 m/min
• B-axis rotation: 42 rpm
• C1 / C2 axes: 400 rpm
• X1/Z1 interpolation feed: up to 500 mm/revOrientable upper turret / milling spindle
• B-axis driven orientable head with Roller Gear Cam (RGC)
• Machining on either left or right spindle
• B-axis resolution: 0.001°; up to 4-axis simultaneous with FANUC 31i-A
• Hirth mechanical locking: head orientation 5°; spindle orientation for multi-edge tools 30°
• Spindle interface: Capto C6 (double-contact)
• Speed: 60–12,000 rpm
• Motor power (low/high electronic range): 10/15/18.5 kW | 15/18.5/22 kW
• Max available power from: 1,500 rpm; max torque: 64 / 96 / 118 Nm
• Built-in motor; air sensor for tool clamping confirmation
• Centralized cooling system; rigid tappingAutomatic tool changer
• Type: Floor-mounted, double-arm; long-Z movable magazine
• Drives: Servo-driven tool-change arm and tool-chain rotation
• Taper: Capto C6
• Tool change time: tool-to-tool 1.8 s; chip-to-chip 10 s
• Max tool diameter: 130 mm (adjacent empty) / 90 mm (adjacent occupied)
• Max tool length: 400 mmMachining capacity
• Max swing over bed: 1,000 mm
• Max swing over carriage: 700 mm
• Max turning diameter from chuck: 670 mm (upper head at 0°) / 760 mm (upper head inclined)
• Max turning length between centres: 1,500 mm
• Max distance between spindle noses: 1,540 mm
• Y-axis through-hole capacity: Ø230 mm (±115 mm)
• Max bar capacity: left Ø102 mm; right Ø76 mm
• Max unsupported workpiece weight: left 400 kg; right 220 kgCoolant and standard equipment
• High-pressure coolant through upper spindle: 12 bar
• External coolant to upper spindle: 8 bar
• Coolant tank capacity: 580 litres
• Automatic lubrication system
Ndjdoz Eaz Topfx Ankob
• Centralized hydraulic system with high-efficiency cooler
• Electrical cabinet with heat exchanger
• Work area lighting; 3-colour alarm/status lamp
• Installation equipment; CE conformity declarationFANUC 31i-A CNC features
• 10.4" colour LCD; extended keyboard
• Manual Guide-i conversational programming
• Minimum programmable increment: linear 0.001 mm; rotary 0.001°