DMG MORI Sprint 65 linear

DMG MORI Sprint 65 linear

This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum main spindle speed of 5000 rpm and a maximum main spindle bar diameter of 65 mm. The machine includes two turrets, each with 12 driven tool positions, and a robust coolant tank capacity of 650 liters. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. Contact us for further details.

• Total hours: 64274 h; Operating hours: 43196 h
• Counter spindle: 17 kW; max speed 5000 rpm; max bar diameter 45 (65) mm
• CNC controlled axes:
• X1: stroke 165 mm; rapid 30 m/min; acceleration 5 m/s2
• Z1: stroke 678 mm; rapid 30 m/min; acceleration 5 m/s2
• Y1: stroke 80 (+50/-30) mm; rapid 30 m/min; acceleration 5 m/s2
• X2: stroke 165 mm; rapid 30 m/min; acceleration 5 m/s2
• Z2: stroke 640 mm; rapid 30 m/min; acceleration 5 m/s2
Bwodpfxjy E Ntks Alyol
• W2: stroke 690 mm; rapid 30 m/min; acceleration 5 m/s2
• Turrets: 2; 12 driven positions per turret; Tool system VDI 30; Max driven tool speed 4000 rpm
• Coolant system: tank approx. 650 l; pump capacity per turret 20 l/min; pressure 7 bar
• Power supply: 91 kVA
• Base machine configuration and functions:
• Drive for slide 1 and 2 (all 12 positions)
• C-axis for main and counter spindle
• Y-axis for slide 1
• Counterspindle collet cleaning with coolant
• Mechanical preparation for oil mist filter
• Electrical and software interface for bar loader
• Angular synchronism between main and counter spindle
• Automatic machine shut down
• 2 additional on/off outputs (4 M-functions)
• Rigid tapping
• Piece and time counter
• Software for polygonal turning (slide 1 and 2)
• Constant cutting speed
• Helical interpolation (slide 1)
• Spindle speed control
• Quadruple warning light
• Cooling device for electrical cabinet
• Control options:
• Tool wear monitoring system (FANUC monitor)
• Sister tool selection system (FANUC monitor)

Additional equipment

• IEMCA MASTER 865 MP 43 L bar feeder
• Swarf (chip) conveyor, belt type
• Workpiece unloading device including belt
• Main spindle collet chuck MPF 65/140 (no axial feed), max Ø 65 mm
• Manual collet changer SACO MPT65/140 and MPF65/140
• Counter spindle chuck SMW 175-BBD, incl. adapter
• 1 set of soft jaws for SMW 175-BBD
• Differential clamping pressure for counter spindle (two selectable pressures)
• External flushing of jaws/collets with coolant on main and counter spindle
• Various new spare parts available

Technical Specification
Counter Spindle Yes