Tool cutterDeckel repowered by FPS
FP2
Tool cutter
Deckel repowered by FPS
FP2
سال ساخت
۲۰۱۳
وضعیت
کارکرده
موقعیت
Ubstadt-Weiher 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- Tool cutter
- تولید کننده:
- Deckel repowered by FPS
- مدل:
- FP2
- سال ساخت:
- ۲۰۱۳
- وضعیت:
- تقریباً نو (استفادهشده)
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
- موقعیت:
- Großer Sand 19-21, 76698 Ubstadt-Weiher, DE
تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A17865861
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۹.۰۹.۱۴۰۳
توضیحات
Universal milling machine Deckel FP2 repowered by FPS built in 2013 with 3-axis digital readout Heidenhain ND 780 As good as new !!!
Technical data:
>> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013
>> Rigid angle table
>> Speed: 40 - 2000 rpm
>> Feed and rapid traverse in 3 axes
>> Drive power .:2.2 KW
>> Travel X/Y/Z: 400/200/400 mm
>> Equipment: Vertical & horizontal spindle
Lasdpfxsvbifgs Agneh
>> Vertical quill and horizontal quill extendable - SK- 40
>> Tightening system S20x2
>> Weight approx. 1100 kg
Accessories and equipment:
>> 3-axis digital readout Heidenhain ND 780
>> Brake motor with immediate spindle stop
>> Central lubrication
>> 2 x emergency stop
>> Operating instructions
>> Coolant device
To the machine :
We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Technical data:
>> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013
>> Rigid angle table
>> Speed: 40 - 2000 rpm
>> Feed and rapid traverse in 3 axes
>> Drive power .:2.2 KW
>> Travel X/Y/Z: 400/200/400 mm
>> Equipment: Vertical & horizontal spindle
Lasdpfxsvbifgs Agneh
>> Vertical quill and horizontal quill extendable - SK- 40
>> Tightening system S20x2
>> Weight approx. 1100 kg
Accessories and equipment:
>> 3-axis digital readout Heidenhain ND 780
>> Brake motor with immediate spindle stop
>> Central lubrication
>> 2 x emergency stop
>> Operating instructions
>> Coolant device
To the machine :
We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2007
ارسال درخواست
تلفن & فکس
+49 7251 ... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
آگهی کوچک

۳٬۹۰۱ km
DECKEL repowered by FPSFP2 NC 2801-100
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است