Machining centerDeckel Maho
DMC 104 V linear

اطلاعات دستگاه
- نام دستگاه:
- Machining center
- تولید کننده:
- Deckel Maho
- مدل:
- DMC 104 V linear
- شماره دستگاه:
- 29110004034
- سال ساخت:
- ۲۰۰۶
- وضعیت:
- آماده به کار (دست دوم)
- قابلیت عملکرد:
- کاملاً عملیاتی
- ساعات کارکرد:
- ۹٬۴۴۲ h
جزئیات فنی
- مسافت جابجایی محور X:
- ۱٬۰۴۰ میلیمتر
- مسافت حرکت محور Y:
- ۶۰۰ میلیمتر
- مسافت حرکت محور Z:
- ۵۰۰ میلیمتر
- تعداد جایگاهها در مگزین ابزار:
- ۳۰
- حداکثر سرعت اسپیندل:
- ۱۲٬۰۰۰ دور/دقیقه
ارائه
- موقعیت:
- مجارستان
– فاصله: حدود ۳٬۳۵۵ کیلومتر
- در دسترس بودن:
- بلافاصله پس از پایان حراج
- شرایط تحویل:
- FCA
€۸۰۰٫۰۰ (الزامی)
رایگان
توضیحات
TECHNICAL DETAILS
Control: Siemens 810D Powerline
Table surface: 1,250 x 600 mm
X-axis travel: 1,040 mm
Y-axis travel: 600 mm
Z-axis travel: 500 mm
spindle & tool holder
Tool holder: SK 40
Spindle speeds: 1 - 12,000 rpm
Spindle drive: 13 kW / 19 kW (100 % / 40 % ED)
Tool changer: 30 positions
MACHINE DETAILS
Spindle hours: 9,442 h
On-time: 32,189 h
EQUIPMENT
- Linear drive in the X-axis for more precise movements
- Bed flushing to clean the work area
- Spiral chip conveyor for efficient chip disposal
- Direct position measuring system for precise position determination
- Temperature compensation of the Z-axis via temperature sensor with active cooling unit
- Blowing air from outside via two pipes for chip removal
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
پرداختها
- هزینههای جانبی خرید:
- ۱۸ %
- شرایط پرداخت:
- ۱۰۰٪ پیشپرداخت
- روشهای پرداخت:
انتقال بانکی
جزئیات پیشنهاد
- شناسه آگهی:
- A18905426
- شماره مرجع:
- AUC-2504020
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۰.۰۱.۱۴۰۴
- پیشنهاد انحصاری:
- فقط در مزایده موجود است
بازدید
Monheim am Rhein DECKEL- MAHO DMGDMC 104 V linear
Lorquí Tetra PakTBA/8 375 S
Bayern Deckel MahoDMC 104 V linear
Warren LandisLT2
Nürnberg JUNKERJUCAM 6XS /12
Fumane (Verona) Tetra Pak®30 Flex For Helicap 23
آلمان HellerMCH 250
Fumane (Verona) Tetra Pak®Homogeniser: Tetra Alex 30
Friesenheim WagnerWMC 1800 (2013)
Łask TETRA PAK A3 COMPACT FLEX 200/250 EDGECOMPLETE LINE IN AS NEW CONDITION
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of ۱۸ % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.























































































































































