Mobile oxygen systemCSF Engineering
CSF-PSA50
Mobile oxygen system
CSF Engineering
CSF-PSA50
EXW VB به اضافه مالیات بر ارزش افزوده
€۴۰٬۰۰۰
سال ساخت
۲۰۲۵
وضعیت
کارکرده
موقعیت
Hamburg 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- Mobile oxygen system
- تولید کننده:
- CSF Engineering
- مدل:
- CSF-PSA50
- سال ساخت:
- ۲۰۲۵
- وضعیت:
- ناقل قطعات یدکی معیوب (کارکرده)
- قابلیت عملکرد:
- بررسینشده
قیمت و مکان
EXW VB به اضافه مالیات بر ارزش افزوده
€۴۰٬۰۰۰
- موقعیت:
- Hamburg, آلمان

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A20841757
- شماره مرجع:
- GM/HH/255058/25/JHA
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۹.۱۰.۱۴۰۴
توضیحات
We are selling, on behalf and for the account of the interested party, the following damaged mobile oxygen filling plant for medical oxygen under the known terms and conditions of sale to the highest bidder.
Hodpfx Aaex Rbk Sjzefb
The system offered for sale is a mobile filtration and filling plant for medical oxygen, built into a custom-made container matching the dimensions of a 40' High Cube container (Dimensions (L x W x H): 1,219 cm x 244 cm x 290 cm).
CSF-PSA50
"Containerized 50m³/h PSA oxygen plant with 36m³/h cylinder filling unit and filling ramp, purity 93 +/- 3%, including spare parts for two years."
The container has structural damage at the rear (door area) roof crossmember: the crossmember shows signs of paint and material abrasion, is severely deformed and bent forward. The weld seam to the right upper corner casting is torn, etc. See images. The door frame is warped. The right side wall is significantly crushed near the door area. The left side wall has a dent in the lower area about 2 m from the doors. The bolted joints of the side walls have been ripped out, leaving holes. Inside the container, the cladding on the container roof and the right side wall is deformed and partially torn off. On one air conditioning unit, the front cover has come loose and is hanging down by a cable. A side panel from a piece of equipment has come out of its frame, fallen, and caused paint abrasions on two components. For the internal plant components (see downloadable PDF list), it cannot be confirmed whether they were damaged as a result of the collision (at approximately 5 km/h).
Difficulty: The container is still located on the premises of UNIKAI Lagerei- und Speditionsgesellschaft mbH, 20457 Hamburg, on a MAFI trailer. According to UNIKAI, it is possible to load the container using suitable lifting gear via the lower pick-up points. Transport should present no issue, as the lower corner castings required for securing during transport are undamaged.
Sales basis: "as is where is" - "ex Hamburg warehouse."
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Hodpfx Aaex Rbk Sjzefb
The system offered for sale is a mobile filtration and filling plant for medical oxygen, built into a custom-made container matching the dimensions of a 40' High Cube container (Dimensions (L x W x H): 1,219 cm x 244 cm x 290 cm).
CSF-PSA50
"Containerized 50m³/h PSA oxygen plant with 36m³/h cylinder filling unit and filling ramp, purity 93 +/- 3%, including spare parts for two years."
The container has structural damage at the rear (door area) roof crossmember: the crossmember shows signs of paint and material abrasion, is severely deformed and bent forward. The weld seam to the right upper corner casting is torn, etc. See images. The door frame is warped. The right side wall is significantly crushed near the door area. The left side wall has a dent in the lower area about 2 m from the doors. The bolted joints of the side walls have been ripped out, leaving holes. Inside the container, the cladding on the container roof and the right side wall is deformed and partially torn off. On one air conditioning unit, the front cover has come loose and is hanging down by a cable. A side panel from a piece of equipment has come out of its frame, fallen, and caused paint abrasions on two components. For the internal plant components (see downloadable PDF list), it cannot be confirmed whether they were damaged as a result of the collision (at approximately 5 km/h).
Difficulty: The container is still located on the premises of UNIKAI Lagerei- und Speditionsgesellschaft mbH, 20457 Hamburg, on a MAFI trailer. According to UNIKAI, it is possible to load the container using suitable lifting gear via the lower pick-up points. Transport should present no issue, as the lower corner castings required for securing during transport are undamaged.
Sales basis: "as is where is" - "ex Hamburg warehouse."
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
اسناد
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2017
ارسال درخواست
تلفن & فکس
+49 421 3... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
آگهی کوچک
Friesenheim
۴٬۱۹۳ km
AircoMT PN 1650 Stickstofferzeugungsanlage
آگهی کوچک
Lübbecke
۴٬۲۲۲ km
Airtech Stickstoff GmbH- ParkerNITRO-Source Plus
آگهی کوچک
Wythenshawe
۴٬۹۶۵ km
HIGH-LINE INDUSTRIESNITROGEN GENERATOR 250
آگهی کوچک
Hessisch Oldendorf
۴٬۱۷۷ km
Atlas CopcoPSAL-SN AIRCO PLUG & PLAY
آگهی کوچک
Erlangen
۳٬۹۹۳ km
OxysystemsOS-60-NX
آگهی کوچک
نروژ
۴٬۷۰۳ km
Amnis Pura6-Bed PSA unit
آگهی کوچک
Erlangen
۳٬۹۹۳ km
OxysystemsOS-40-NX
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است

































































































