30 Ton x 1270 mm NC Hydraulic Press Brake

CRONOSSTECH HPB NC 30-1270

Standard Equipment
Stroke: 150 mm
Distance Between Upper and Lower Dies (Daylight): 265 mm
Throat Depth: 255 mm
Bending Length: 1270 mm
Distance Between Columns: 1010 mm
Machine Features
Double-cylinder upper beam bending system
Steel frame construction providing high static and dynamic rigidity
Lasdpfx Aezcl S Njhyof
Upper beam movement supported by fiber slide bearings
High-strength balancing shaft and eccentric bearing system supporting parallelism
Motor-controlled angle adjustment with a mechanical stroke system inside the cylinder
Wide opening and high stroke suitable for use with different dies
Easy tonnage adjustment and bottom dead center stop via NC control
Hydraulic safety system against overpressure
Dual-speed operating system consisting of free descent, bending, and fast return
CE-compliant, multi-functional foot pedal with emergency stop
Compact hydraulic power unit, top-mounted, with HAWE or Rexroth components
Siemens, Pizzato, and Balluff electrical components
LEUZE safety system and learning mode
NC control unit with 500 programs and 200 lines per program
Program transfer via USB
Standard upper and lower die set
NC-controlled motorized X-axis back gauge (500 mm)
Back gauge system with linear slides
0.2 mm positioning accuracy
Motor-controlled Y-axis angle adjustment
Mobile control panel
Front support arms with linear slides
Lower die centering bolts
Programmable, precise back gauge retraction function
Optional Equipment
Motorized R-axis
Special bending dies
Special pedal system with dual-hand + foot control
DSP or Fiessler safety systems
Extended back gauge distance
Additional back gauge fingers
Additional front support arm
Manual crowning system
Motorized crowning system
Technical Specifications
Bending Force: 30 tons
Maximum Bending Capacity: 4 mm
Bending Length: 1270 mm
Distance Between Columns: 1010 mm
Stroke: 150 mm
Bending Speed: 10 mm/s
Free Descent Speed: 70 mm/s
Throat Depth: 255 mm
Distance Between Upper and Lower Dies: 265 mm
Table Width: 130 mm
Table Height: 830 mm
Main Motor Power: 3 kW
X-Axis Motor: 0.55 kW
Y-Axis Motor: 0.18 kW
Optional R-Axis Motor: 0.25 kW
Back Gauge Distance: 500 mm
Oil Tank Capacity: 90 L
Machine Length: 1780 mm
Machine Width: 1375 mm
Machine Height: 2160 mm
Machine Weight: 1700 kg

Country of Origin: Turkey
Manufacturer: CRONOSSTECH Makina

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.