CNC press brake CR GOLD 130/31 130tCR Electronic
Gold 130/31
CNC press brake CR GOLD 130/31 130t
CR Electronic
Gold 130/31
EXW VB به اضافه مالیات بر ارزش افزوده
€۲۶٬۵۰۰
سال ساخت
۲۰۰۴
وضعیت
کارکرده
موقعیت
Essen 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- CNC press brake CR GOLD 130/31 130t
- تولید کننده:
- CR Electronic
- مدل:
- Gold 130/31
- شماره دستگاه:
- P020504
- سال ساخت:
- ۲۰۰۴
- وضعیت:
- کارکرده
قیمت و مکان
EXW VB به اضافه مالیات بر ارزش افزوده
€۲۶٬۵۰۰
- موقعیت:
- Schnabelstr. 4, 45134 Essen, DE
تماس بگیرید
جزئیات فنی
- نوع کنترل:
- کنترل CNC
- درجه اتوماسیون:
- نیمهخودکار
- نوع تحریک:
- هیدرولیک
- تولیدکننده کنترلر:
- Delem
- مدل کنترلر:
- DA-66W
- حداکثر نیروی خمشی:
- ۱۳۰ t
- عرض کار:
- ۳٬۱۵۰ میلیمتر
- طول کورس (ضربه):
- ۳۵۰ میلیمتر
- عمق گلو:
- ۵۰۰ میلیمتر
- فاصله بین پایهها:
- ۲٬۶۰۰ میلیمتر
- ارتفاع نصب:
- ۵۵۰ میلیمتر
- سرعت عملکرد:
- ۱۰ میلیمتر/ثانیه
- سرعت دنده عقب:
- ۱۱۵ میلیمتر/ثانیه
- تعداد محور:
- ۶
- ارتفاع میز:
- ۹۵۰ میلیمتر
- نوع تاجگذاری:
- دارای کنترل CNC
- ظرفیت مخزن روغن:
- ۱۶۰ ل
- مسافت جابجایی محور X:
- ۵۰۰ میلیمتر
- تنظیم گیج عقب:
- دارای کنترل CNC
- سرعت تکیهگاه عقب محور R:
- ۱۰۰ میلیمتر/ثانیه
- مسافت حرکت گیره پشتی محور R:
- ۱۶۰ میلیمتر
- وزن کل:
- ۱۳٬۵۰۰ کیلوگرم
- طول کل:
- ۲٬۳۰۰ میلیمتر
- عرض کل:
- ۴٬۰۰۰ میلیمتر
- ارتفاع کل:
- ۳٬۱۰۰ میلیمتر
- قدرت:
- ۱۵ کیلووات (۲۰٫۳۹ اسب بخار)
- ولتاژ ورودی:
- ۴۰۰ V
- جریان ورودی:
- ۳۵ A
- فرکانس ورودی:
- ۵۰ هرتز
- تجهیزات:
- ابزار فوقانی, ابزار پایین, توقف اضطراری, سیستم کلمپ ابزار اروپایی, مانع نور ایمنی, مستندات / راهنما, نشان CE
جزئیات پیشنهاد
- شناسه آگهی:
- A19624101
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۷.۰۶.۱۴۰۴
توضیحات
Offered Machine:
Used CNC Hydraulic Press Brake
Manufacturer: CR Electronic
Model: GOLD 130/31
Year of manufacture: 2004
Control: Delem DA-66W (8-axis capable)
Iiedpjw A Rggsfx Acysh
Condition: used, fully functional (Z-axes currently out of service, see below)
Technical Specifications:
- Press force: 1,300 kN (130 t)
- Bending length: 3,100 mm
- Distance between uprights: 2,600 mm
- CNC-controlled axes: Y1, Y2, X, R, Z1, Z2 (Note: Z1 and Z2 are currently electronically out of service – new servo drives required. Manual movement possible.)
- Stroke: 350 mm
- Installation height: 550 mm
- Throat depth: 500 mm
- Backgauge (X): 600 mm
- Table height: 950 mm
- Working speed: 10 mm/s
- Return speed: 115 mm/s
- Motor power: 11 kW
- Operating pressure: 275 bar
- Weight: approx. 13,500 kg
Equipment & Features:
- CNC-controlled hydraulic crowning
- System tool holders top & bottom
- Manual quick clamping of upper tools
- Laser optical finger guard (safety light curtain)
- PLC-supported diagnostic system
- 2 support arms with quick adjustment
- Operating manuals available
- CE compliant
Including accessories:
- Fully equipped tool cabinet
- Upper tool 88°, full machine length
- Upper tool 35°, full machine length
- Round bending upper tool
- V8 T-die, full machine length
- V12 T-die, full machine length
- Flattening die, approx. 2,000 mm length
Condition / Remarks:
- Machine is in well-maintained condition, currently connected
- Inspection and test run under power possible on site
- Z1/Z2 currently not operational – new servo drives required
- Machine is being replaced due to a planned modernization involving the acquisition of a new press brake.
Price: €26,500 net (plus VAT)
Negotiable for quick and straightforward purchase.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Used CNC Hydraulic Press Brake
Manufacturer: CR Electronic
Model: GOLD 130/31
Year of manufacture: 2004
Control: Delem DA-66W (8-axis capable)
Iiedpjw A Rggsfx Acysh
Condition: used, fully functional (Z-axes currently out of service, see below)
Technical Specifications:
- Press force: 1,300 kN (130 t)
- Bending length: 3,100 mm
- Distance between uprights: 2,600 mm
- CNC-controlled axes: Y1, Y2, X, R, Z1, Z2 (Note: Z1 and Z2 are currently electronically out of service – new servo drives required. Manual movement possible.)
- Stroke: 350 mm
- Installation height: 550 mm
- Throat depth: 500 mm
- Backgauge (X): 600 mm
- Table height: 950 mm
- Working speed: 10 mm/s
- Return speed: 115 mm/s
- Motor power: 11 kW
- Operating pressure: 275 bar
- Weight: approx. 13,500 kg
Equipment & Features:
- CNC-controlled hydraulic crowning
- System tool holders top & bottom
- Manual quick clamping of upper tools
- Laser optical finger guard (safety light curtain)
- PLC-supported diagnostic system
- 2 support arms with quick adjustment
- Operating manuals available
- CE compliant
Including accessories:
- Fully equipped tool cabinet
- Upper tool 88°, full machine length
- Upper tool 35°, full machine length
- Round bending upper tool
- V8 T-die, full machine length
- V12 T-die, full machine length
- Flattening die, approx. 2,000 mm length
Condition / Remarks:
- Machine is in well-maintained condition, currently connected
- Inspection and test run under power possible on site
- Z1/Z2 currently not operational – new servo drives required
- Machine is being replaced due to a planned modernization involving the acquisition of a new press brake.
Price: €26,500 net (plus VAT)
Negotiable for quick and straightforward purchase.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2024
ارسال درخواست
تلفن & فکس
+49 201 6... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است