Floor track systemCloos
2 Qirox Roboter auf Bodenfahrbahn
Floor track system
Cloos
2 Qirox Roboter auf Bodenfahrbahn
سال ساخت
۲۰۱۹
وضعیت
کارکرده
موقعیت
آلمان 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- Floor track system
- تولید کننده:
- Cloos
- سال ساخت:
- ۲۰۱۹
- وضعیت:
- کارکرده
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
- موقعیت:
- Oberpfalz, Deutschland

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A19042101
- بهروزرسانی:
- آخرین بهروزرسانی در ۱۶.۰۲.۱۴۰۴
توضیحات
System consisting of:
1 Qirox QRC 350-E welding robot including QC2 adv. control unit, 1 Qirox QRC 410-E welding robot including QC2 adv. control unit, handheld programming unit with 25 m cable, 24 V buffering, 2 GB flash drive
Software expansion for each robot:
Gas nozzle sensor, arc seam detection, multi-layer technology, point editor, transformation, 15" TFT with touchscreen on the cabinet, master-slave for robots 1 and 2, RSM software for remote maintenance
2 ICSE LD offline lasers
Robot 1 single-wire tandem welding equipment with automatic torch change system:
2 Qineo Puls 600 (600A) with master control module, 3 wire feeders, 3 torch hose packages, single MRW 510 evo welding torch, Duo drive CDD 2, single torch test gauge, and CDD, single-wire mechanical cleaning with external cleaning, pressure booster, 1 tandem burner ZMW 850 evo, Duo drive tandem CDD-T, burner test gauge single and with CDD, tandem mechanical cleaning with external cleaning
Ground track 50 kN, travel distance 26 m, 1 C stand with height slide, travel distance 1.5 m for robot 1, 1 fixed C stand for robot 2
2 WPST-30 kN rotating devices, electric. Shaft, synchronous drive, designed as a gyro wheel for the support of hall beams (min. size 70x180 and max. 400x900 mm, support weight 4000 kg, on a motorized sliding track, max. clamping length approx. 19 m,
1 L-shaped manipulator WPS-TS 20 kN, turning radius 2750 mm
Connection control, 2 light barriers for floor track protection, 2 start pre-selectors, partition walls and sliding gates including limit switch protection, 2 bumpers for floor track protection of both carriages, signal light for system status.
Ihedpfx Agowgd Hzobew
Both robots can weld on the hall beams, and robot 2 can also weld on the L-shaped manipulator.
1 Tecau filter unit with 6000 m³ extraction capacity, 2 mobile extraction hoods with curtains, extraction slotted duct
Delivery date: available immediately. Appointments by arrangement. Inspections under power are possible.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
1 Qirox QRC 350-E welding robot including QC2 adv. control unit, 1 Qirox QRC 410-E welding robot including QC2 adv. control unit, handheld programming unit with 25 m cable, 24 V buffering, 2 GB flash drive
Software expansion for each robot:
Gas nozzle sensor, arc seam detection, multi-layer technology, point editor, transformation, 15" TFT with touchscreen on the cabinet, master-slave for robots 1 and 2, RSM software for remote maintenance
2 ICSE LD offline lasers
Robot 1 single-wire tandem welding equipment with automatic torch change system:
2 Qineo Puls 600 (600A) with master control module, 3 wire feeders, 3 torch hose packages, single MRW 510 evo welding torch, Duo drive CDD 2, single torch test gauge, and CDD, single-wire mechanical cleaning with external cleaning, pressure booster, 1 tandem burner ZMW 850 evo, Duo drive tandem CDD-T, burner test gauge single and with CDD, tandem mechanical cleaning with external cleaning
Ground track 50 kN, travel distance 26 m, 1 C stand with height slide, travel distance 1.5 m for robot 1, 1 fixed C stand for robot 2
2 WPST-30 kN rotating devices, electric. Shaft, synchronous drive, designed as a gyro wheel for the support of hall beams (min. size 70x180 and max. 400x900 mm, support weight 4000 kg, on a motorized sliding track, max. clamping length approx. 19 m,
1 L-shaped manipulator WPS-TS 20 kN, turning radius 2750 mm
Connection control, 2 light barriers for floor track protection, 2 start pre-selectors, partition walls and sliding gates including limit switch protection, 2 bumpers for floor track protection of both carriages, signal light for system status.
Ihedpfx Agowgd Hzobew
Both robots can weld on the hall beams, and robot 2 can also weld on the L-shaped manipulator.
1 Tecau filter unit with 6000 m³ extraction capacity, 2 mobile extraction hoods with curtains, extraction slotted duct
Delivery date: available immediately. Appointments by arrangement. Inspections under power are possible.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
این آگهیها ممکن است برای شما نیز جالب باشند.
آگهی کوچک
Mierlo
۴٬۴۰۴ km
Herber150RL
آگهی کوچک
Hessisch Lichtenau
۴٬۱۱۹ km
BACHACW 2500
آگهی کوچک
Gondelsheim
۴٬۱۴۷ km
Demag Portalkran KBK 250KGKBKI/II KBK1/2 8x4m 250Kg DC Kettenzug
آگهی کوچک
Jelah
۳٬۳۶۲ km
BAYKALAPH 3100/10
آگهی کوچک
Luckenwalde
۳٬۹۱۷ km
PROTONSTP-STP
آگهی کوچک
Wittenberge
۴٬۰۳۷ km
WeinbrennerGP250 4050
آگهی کوچک
Fevziçakmak
۲٬۰۱۴ km
TFONSurfacer® RRBC (Tailored Machines)
آگهی کوچک
Hergensweiler
۴٬۰۴۱ km
ProtecKT 3000 HV
آگهی کوچک
مجارستان
۴٬۲۱۹ km
Yaskawa MotomanAR1440
آگهی کوچک
Vaterstetten
۳٬۹۰۳ km
KraussMaffei Technologies GmbHKM 160 / 750 PA G01
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است




















































































































