Folder gluer

Bobst Autoplatine SP 104 ER

Bobst Autoplatine SP 104 ER
Year: 2001
Serial Number: 0578 034 05 / 0531 021 05

Automatic die cutter for paper and cardboard converting, processing sheets up to 1,040 x 740 mm at up to 8,000 sheets per hour. The press is fully equipped with a waste stripping station and a blank stack delivery station with automatic non-stop and pallet changing device. Operation is controlled via the Bobst C.U.B.E. control system with an additional panel at the feeder, supported by Bernoulli sheet braking at the stripping and delivery stations.

Equipment
Machine
Platform with safety barrier
Centerline system for quick job changeovers
Electronic sheet travel control
Adjustable centerings at stripping and delivery stations
Anti-static stainless steel plate
Sheet synchronization with machine stopped
4 front lays, adjustable in pairs, with front register control
Pull guide (OS) with side register control
Pull guide (OOS) with side register control
Double sheet detector
Feed belt slow-down device
Support plates at platen entry
Nedpfx Alj Afwrve Nelh
Sheet hold-down device
Upper frame with manual lifting device
Upper transport for paper, paperboard and corrugated board up to 4 mm
4 laterally guided transport belts
Platen Press
Gripper reopening device
Die cutting without gripper margin
Equipment centering and locking
Locking of the chase against the upper beam
Cutting force measurement with strain gauge
Synthetic supporting plate, 22.5 mm
Upper chase with quick locking, fixed bottom plate
Compensating plate, 4 mm ground steel
Adjustable supporting plate centerings, ±0.9 mm
Lowering of the chain guides
Waste Stripping Station
System with 3 pull-out frames
2x upper pull-out frame
2x lower pull-out frame
Central quick locking pull-out frame
Blank Stack Delivery Station
Automatic binder sheet inserter
Gripper opening device for full sheet stacks
Automatic non-stop device
Special non-stop rack for small boxes below 140 mm
Pile raising security
Waste / skeleton removal apron
Braking brush of the waste skeleton
Front trim ejection control by photocells
2x upper pull-out frame
Lower pull-out frame
Pallet changing device with conveyor
Technical Details
Parameter Value
Production Rate 8,000 sheets/hour
Max Sheet Size 1,040 x 740 mm
Min Sheet Size 400 x 350 mm
Max Die-Cutting Size (with gripper margin) 1,040 x 725 mm
Max Cutting Die Size 1,050 x 746 mm
Convertible Stock Paper from 80 g/m², board up to 2,000 g/m², corrugated up to 4 mm
Parameter Value
Max Platen Pressure 2.5 MN (250 t)
Max Pile Height Feeder 1,815 mm (non-stop 1,515 mm), delivery 1,430 mm
Max Pallet Size 1,200 x 800 mm
Compressed Air min. 6 bar; without central supply, a compressor of 80 m³/h with 500 l tank is required
Net Weight 20,000 kg
Electricity Main motor 11 kW, total connected load max. 25 kVA

still connected to power

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.