Bandsaw - HorizontalBERG & SCHMID
DGS 350/450 HA-I Easy 34
Bandsaw - Horizontal
BERG & SCHMID
DGS 350/450 HA-I Easy 34
وضعیت
جدید
موقعیت
آلمان 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
قیمت و مکان
- موقعیت:
- Deutschland
تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A4378850
- شماره مرجع:
- 1108-66228
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۶.۰۵.۱۴۰۳
توضیحات
capacity 90 degrees: round 350 mm
capacity 90 degrees: square 330 mm
450x320
saw band length 4250x34x1,1 mm
band speed 40 + 80 m/min
table height 845 mm
saw band width 34 mm
total power requirement 2,2 kW
weight of the machine ca. 0,985 t
dimensions of the machine ca. 1,4 x 2,0 x 2,2 m
Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I
· miter left + right 60° without machine conversion
· 34 mm saw blade width
· Large material support turntable, ball bearings
· To position the saw blade guides using a very wide linear guide
· Strong, robust transmission
· Large chipboards
· Infeed and outfeed roller
Removable chip tray (disinfection)
· Free-standing control panel, safe and ergonomic
· Storage space for tapes, consumables
· Cutting pressure regulator Feed regulator
· Fully hydraulic vise
Preload super fast (front loading)
· Material height sensor (automatic cut start detection)
Itsdpjfgyicsfx Acyjn
Semi-automatic function:
1. Clamp material
2. Saw starts
3. Rapid lowering to the start of the material or the same for series cutting
cut
4. Saw band off
5. Raise the frame to just above the material
6. Open the vise
Optimum, material-independent cutting result through fine adjustment of the
saw frame by means of:
*Pressure Control Valve (Cutting Pressure Force)
*Feed Control Valve (Speed)
*Switch with pictogram, easy and clear to use
capacity 90 degrees: square 330 mm
450x320
saw band length 4250x34x1,1 mm
band speed 40 + 80 m/min
table height 845 mm
saw band width 34 mm
total power requirement 2,2 kW
weight of the machine ca. 0,985 t
dimensions of the machine ca. 1,4 x 2,0 x 2,2 m
Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I
· miter left + right 60° without machine conversion
· 34 mm saw blade width
· Large material support turntable, ball bearings
· To position the saw blade guides using a very wide linear guide
· Strong, robust transmission
· Large chipboards
· Infeed and outfeed roller
Removable chip tray (disinfection)
· Free-standing control panel, safe and ergonomic
· Storage space for tapes, consumables
· Cutting pressure regulator Feed regulator
· Fully hydraulic vise
Preload super fast (front loading)
· Material height sensor (automatic cut start detection)
Itsdpjfgyicsfx Acyjn
Semi-automatic function:
1. Clamp material
2. Saw starts
3. Rapid lowering to the start of the material or the same for series cutting
cut
4. Saw band off
5. Raise the frame to just above the material
6. Open the vise
Optimum, material-independent cutting result through fine adjustment of the
saw frame by means of:
*Pressure Control Valve (Cutting Pressure Force)
*Feed Control Valve (Speed)
*Switch with pictogram, easy and clear to use
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2003
ارسال درخواست
تلفن & فکس
+49 2863 ... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است