Hydraulic swing beam shear

Baykal MGH 3110

Technical data:
Cutting length: 3100 mm
Max. sheet thickness, St 42: 10 mm
Max. sheet thickness, INOX/V2A: 6.0 mm
Cutting angle: 2.0°
Stroke rate: 12 per minute
Rear gauge range: 5.0 mm to 1000 mm
Motor power: 22 kW
Hydr. clamps: 17 pcs
Oil tank capacity: 170 l
Max. oil pressure in the cylinder: 260 kg/cm²

Standard accessories:
- CNC-controlled, motorized rear gauge. Travel distance 1000 mm. With backlash-free ball screws.
- Table construction, closed design, consisting of interchangeable support plates including ball rollers
- Manual cutting gap adjustment, centrally operated on the right side stand
- Electric motor: 400 V, 50 Hz, 3-phase
- Single or continuous stroke
- Tip function for lowering the top beam, e.g., for adjusting the cutting gap
- Side gauge 90°, 920 mm long, measuring length from the cutting line 1000 mm
- 2 additional support brackets
Hjdezlpahjpfx Abasnp
Design of the two front support brackets with scale, T-slots, and tilting cams
- CNC control Cybelec "Cybtouch 8W" for automatic adjustment
- of the cutting gap (option)
- of the rear gauge
- of the cutting length
Further programming functions:
- Step repetition
- Piece counter
- Finger protection light curtain at the front instead of a safety grille, allowing an unobstructed view of the cutting zone
After interrupting the cutting function of the shear and the clamps by activating the light curtain, the cutting function is immediately released again when the operator's hand(s) are no longer in the danger area. The reset button does not need to be pressed.
- Rear gauge - retraction
- "Return to sender", smallest sheet part 100 mm x 160 mm (not possible with sheet support type "A", only with sheet support "U")
RS-232 interface, LCD screen 128 x 64 mm.
- 1 set of blades mounted on the machine for cutting steel with a strength of 450 - 700 K/mm². Cutting edges: top blade 2, bottom blade 4, material grade "K110", manufacturer: Böhler Germany/Austria
- Individually acting hydr. clamps with plastic inserts
- Oil level indicator
- Oil filling
- Display of the cutting line by blade illumination and wire
- Operating hour counter
- CE conformity
- Operating manual, spare parts list, wiring diagram, hydraulic diagram
- Painting, 3-color: Body: RAL7015 slate gray; Side covers: RAL7035 light gray; Finger protection: RAL3003 ruby red

Included: Motorized cutting gap adjustment. Controlled via CNC Cybelec "Cybtouch 8W".

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.