Linear robot

Arburg Multilift V 15 kg

We are selling our Multilift V 15KG with only 7,500 operating hours. The machine can be inspected/tested; original purchase price was €59,000!

Technical Specifications:

Z-axis (crosswise to the machine longitudinal axis)
Stroke: 1,600 mm
Max. speed: 3.0 m/s

X-axis (parallel to the machine longitudinal axis)
Stroke: 900 mm
Max. speed: 2.0 m/s

Y-axis (vertical/plunge axis)
Stroke: 1,000 mm

C-axis (for gripper rotation)
- Swing range 0° / 90°, both end positions monitored and manually adjustable
- Pneumatic drive, including valve control
Nedpfxjy Emm Us An Tsla
- Max. torque at 6 bar: 28 Nm
- Weight: 2.6 kg

First vacuum unit (Venturi principle) with air saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, vacuum programmable, integrated condition monitoring for early detection of leaks and wear, routed close to the gripper;
Customer-side hose connection: push-in fitting for hose size OD 6 / ID 4

Second vacuum unit (Venturi principle) with air saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, vacuum programmable, integrated condition monitoring for early detection of leaks and wear, routed close to the gripper;
Customer-side hose connection: push-in fitting for hose size OD 6 / ID 4

Third vacuum unit (Venturi principle) with air saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, vacuum programmable, integrated condition monitoring for early detection of leaks and wear, routed close to the gripper

Fourth vacuum unit (Venturi principle) with air saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, vacuum programmable, integrated condition monitoring for early detection of leaks and wear, routed close to the gripper;
Customer-side hose connection: push-in fitting for hose size OD 6 / ID 4

Tenth pneumatic valve 5/3 with locked center position for gripper functions, piped to the gripper flange with quick-release couplings DN 2.7 for hose size OD 6 / ID 4; customer-side hose connection

8 freely programmable inputs for querying 8 gripper-mounted sensors, pre-wired to the gripper flange with a 25-pin connector; up to 8 sensors can be monitored; the corresponding mating connector for the gripper-side connection is included

Second interface for querying 8 additional sensors, via 25-pin connector on the gripper flange, incl. mating connector for gripper-side connection

Third interface for querying 8 additional sensors, via 25-pin connector on the gripper flange, incl. mating connector for gripper-side connection

Fourth interface for querying 8 additional sensors, via 25-pin connector on the gripper flange, incl. mating connector for gripper-side connection

Interface with 4 freely programmable inputs and outputs, non-isolated, on a 42-pin socket on the MULTILIFT, for peripheral devices

Additional interface with 16 freely programmable inputs and outputs (24V DC), non-isolated, wired to a 72-pin socket on the MULTILIFT
Push-in fitting for hose size OD 6 / ID 4

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.