Assembling machine

Apex BGO-80B (Typ 56217)

Heat and dry a large hall, greenhouse, workshop, storage room, or construction site for extended periods without interruption for refueling.

This low-usage APEX BGO-80B delivers 80 kW of heating output and comes with a complete 1000-liter external tank system, including a certified steel containment basin, for long runtimes between refills. The built-in 69-liter tank is sufficient for shorter jobs. Approximately 200 operating hours; manufactured 01/2026; thermostat-controlled automatic operation.

Only one unit is available – once sold, it’s gone. Pickup and transport slots are limited.

Best for: heating and drying halls, workshops, greenhouses, storage rooms, and construction sites requiring long runtimes without refueling.
Not suitable for: enclosed spaces without an exhaust connection or living areas – indirectly fired, with exhaust vented through the Ø150 mm chimney.

What the specifications mean in practice:
• 80 kW heating output – heats large halls and open working areas, not just a corner.
• 1000L external + 69L internal tank – long runtime with fewer refills.
• 2,000 m³/h airflow – distributes warm air across a wide area.
• Thermostat + digital display + 10m external room thermostat – automatic operation.
• Indirect firing, Ø150mm chimney – combustion gases are vented outside, keeping the air clean for drying.
• Large-wheel chassis – can be repositioned by a single person.

Complete package includes: heater with digital thermostat and removable chimney, external room thermostat (10m cable), 1000L tank with EAGS-certified steel containment basin (mfg. no. 199890), and 2 oil-resistant connection hoses.

Technical data:
– Model: APEX BGO-80B (Type 56217)
– Heating output: 80 kW / 68,800 kcal/h
– Fuel: Diesel/heating oil
– Consumption: 7.5 l/h
– Mains voltage: 230V~50Hz
– Fan motor: 900W
– Blower output: 2,000 m³/h
– Blower outlet: 340mm
– Chimney: Ø150mm
– Internal tank: 69 l
– Dimensions: 1330x568x1028mm
– Weight: 59 kg
– Manufactured: 01/2026
– Protection: IPX4
Ndjdpfx Aszrwapenkeb

Condition: Well-maintained, ~200 operating hours, fully functional.

Location: Stanserstrasse 50, 6064 Kerns (self-pickup, transport by arrangement).

Buy with confidence: manufactured 01/2026, only ~200 hours of use, used by us for hall heating/drying, fully functional, test run possible before pickup. Nameplate photos and a running video are available; in-person inspection in Kerns OW by appointment. You may verify the identity, condition, and operation before paying – we guarantee the machine is as described, complete, and functional at the time of inspection.

Why buy now: a single used unit, not stock. Once sold, this configuration (heater + tank + certified basin, sold together) is gone.

First-buyer bonus: free functional test run before pickup, tank connected and thermostat set to your target temperature, at no extra cost. Valid until Sept 9, 2026, or until sold.

Action: send your intended application, required capacity, and destination – we will confirm suitability and provide a transport estimate.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.