Laser welding system 4 kW / 6 axes

AMADA Laserschweißanlage FLW-4000

Technical Data / technical details:

The FLW is a flexible and highly productive laser welding cell with extensive equipment. The focused laser beam is used as an energy source to melt and join materials together. The laser welding cell consists of a fiber laser and a 6-axis industrial robot, which moves along a travel rail. The parts to be welded are clamped onto a rotary-tilting table. The safety enclosure is equipped with a sliding door to ensure safe operation.

Robot:

Type: M-710iC/50 (FANUC)
Robot controller: SYSTEM R-30iA (FANUC)
CNC control: AMNC
Number of controlled axes: 6

Reach: 2,050 mm
Welding head: AMADA
Repeatability: 0.07 mm
Safety enclosure: Full enclosure

Robot track:

Length: 1,500 mm
Travel speed: 60 m/min
Repeatability: ± 0.1 mm

Positioning table:
Working height: 700 mm
Max. load capacity: 500 kg
Rotary axis: ± 720°
Tilting axis: ± 90°

Laser source:
Type: YLS4000-S2T
Wavelength: 1,070 – 1,080 μm
Laser power: 4 kW

Control:

Type: Amada
Display: 15” LCD colour touchscreen
Controlled axes: Robot and linear axis
Coordination between robot and laser source
Memory: 3 MB SRAM
I/O interface: LAN, USB

Welding Head: Amada
Focus position adjustment: -10 mm to 50 mm
CCD camera for TAS system included as standard
Optical weaving included as standard
Cross jet nozzle included as standard
Coaxial nozzle included as standard
Welding wire feed: 0.8 to 1.6 mm

Weaving System:
Gisdpfx Agsxndynomel

The integrated rotary optics allow the laser beam to move in a circular pattern. The patented system by AMADA enables welding of larger gaps with or without filler material and even allows welding of aluminum.

NC Focus System:

The NC Focus System automatically sets the optimal focus position for the specific welding condition. It supports welding simple butt joints as well as hard-to-reach corners.

Filler wire and intelligent gas supply:

Up to 20 kg of filler wire can be used. When using the TAS (Teach Assistant System), the gas nozzle retracts automatically.

TAS (Teach Assistant System):

The TAS system eliminates time-consuming manual teaching operations. Deviation between the programmed and actual weld path is detected using a CCD camera.

Condition:
Very good condition
Machine has been used very little: approx. 16,500 operating hours.

The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.