Bending machineBluhm Systeme
e-SolarMark FL
Bending machine
Bluhm Systeme
e-SolarMark FL
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۴٬۸۰۰
وضعیت
کارکرده
موقعیت
Borken 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
قیمت و مکان
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۴٬۸۰۰
- موقعیت:
- Einsteinstraße 8a, 46325 Borken, Deutschland

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A14565049
- شماره مرجع:
- 23922
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۵.۰۸.۱۴۰۳
توضیحات
Bluhm Systeme marking lasers
Here we offer you a Bluhm Systeme marking laser.
Bluhm Systeme marking laser fiber laser e-SolarMark FL Without function guarantee (untested)
Introduction:
The e-SolarMark FL10W and 30 W are class IV lasers in accordance with the lEC 825
and EN 60825 (standards for end-user applications). It is designed to be
integrated into a system or operated separately with a protective housing.
After installation, the laser system must meet the requirements for a protection class
product in accordance with the above-mentioned directives.
The e-SolarMark is a laser system for marking and engraving plastics,
metals and foils while stationary or in motion.
Technical specifications
e-SolarMark description
Prodoq Rtz Hopfx Ab Djd
The e-SolarMark system consists of two main components:
1. the marking unit with laser head (scanning head) with focusing lens.
2. the control unit contains the power supply unit, electronic control system and firmware
for the system function, I/O slots inside.
The e-SolarMark includes a fixed galvo scanning head equipped with a lens for
a square marking field with standard dimensions of 70 X 70 mm
Laser specification in standard version
Laser Type---Fiber Laser
Laser output power---FL2 model: 19W; typical
Wavelength---1062 nm typical
Internal Modulation---20 to 80 kHz
Scanner Head Description:
Scan Head---Two galvanometric mirror scanners with hard,
highly reflective dielectric coating.
F-Theta
Lens types and their characteristics:
Lens marking field 70x70 mm to 300 x 300 mm
Focus distance B 192 mm
Working environment Conditions:
Relative humidity up to 80% non-condensing
Operating temperature 5 - 40°C
Recommended operating temperature 15-25°C
Dimensions W x H x D
Laser unit 122 x 108 x 495 mm
Control unit 520 x 380 x 215 mm
Cable length marking/control unit 3 m
Weight marking unit 5 kg
Weight of control unit 15 kg
Mains voltage
115/230 VAC. 50/60 Hz, single-phase.
Power consumption FL2 model 450W
Type: e-SolarMark FL
Condition: gebraucht / used
Scope of delivery: (see picture)
(Changes and errors in the technical data, specifications are reserved!)
We will be happy to answer any further questions you may have on the phone.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Here we offer you a Bluhm Systeme marking laser.
Bluhm Systeme marking laser fiber laser e-SolarMark FL Without function guarantee (untested)
Introduction:
The e-SolarMark FL10W and 30 W are class IV lasers in accordance with the lEC 825
and EN 60825 (standards for end-user applications). It is designed to be
integrated into a system or operated separately with a protective housing.
After installation, the laser system must meet the requirements for a protection class
product in accordance with the above-mentioned directives.
The e-SolarMark is a laser system for marking and engraving plastics,
metals and foils while stationary or in motion.
Technical specifications
e-SolarMark description
Prodoq Rtz Hopfx Ab Djd
The e-SolarMark system consists of two main components:
1. the marking unit with laser head (scanning head) with focusing lens.
2. the control unit contains the power supply unit, electronic control system and firmware
for the system function, I/O slots inside.
The e-SolarMark includes a fixed galvo scanning head equipped with a lens for
a square marking field with standard dimensions of 70 X 70 mm
Laser specification in standard version
Laser Type---Fiber Laser
Laser output power---FL2 model: 19W; typical
Wavelength---1062 nm typical
Internal Modulation---20 to 80 kHz
Scanner Head Description:
Scan Head---Two galvanometric mirror scanners with hard,
highly reflective dielectric coating.
F-Theta
Lens types and their characteristics:
Lens marking field 70x70 mm to 300 x 300 mm
Focus distance B 192 mm
Working environment Conditions:
Relative humidity up to 80% non-condensing
Operating temperature 5 - 40°C
Recommended operating temperature 15-25°C
Dimensions W x H x D
Laser unit 122 x 108 x 495 mm
Control unit 520 x 380 x 215 mm
Cable length marking/control unit 3 m
Weight marking unit 5 kg
Weight of control unit 15 kg
Mains voltage
115/230 VAC. 50/60 Hz, single-phase.
Power consumption FL2 model 450W
Type: e-SolarMark FL
Condition: gebraucht / used
Scope of delivery: (see picture)
(Changes and errors in the technical data, specifications are reserved!)
We will be happy to answer any further questions you may have on the phone.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2012
ارسال درخواست
تلفن & فکس
+49 2861 ... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
آگهی کوچک
Bottrop
۴٬۳۱۴ km
جرثقیل نصبشده روی کامیون
MAN35.510 P+ 955 Effer jib Seilwind New Truck
MAN35.510 P+ 955 Effer jib Seilwind New Truck
آگهی کوچک
Hedel
۴٬۴۳۶ km
MANTGS 35.510 8x2 (4) FASSI 82TM!!JIB/LIER/WINCH!!...
آگهی کوچک
Mudersbach
۴٬۲۳۱ km
FastechFP 30
آگهی کوچک
HETEREN
۴٬۴۰۴ km
MANTGX 35.640 8x4-4 BL EFFER 395/8S
آگهی کوچک
آلمان
۴٬۰۶۹ km
KlingelnbergSNC30
آگهی کوچک
Bünde
۴٬۲۲۱ km
SIMASVT 40 Super
آگهی کوچک
Hürth
۴٬۳۰۶ km
ROMERProfiSpray V
آگهی کوچک
Skarżysko-Kamienna
۳٬۳۸۱ km
ROMER / Catalog pricesProfiSpray
آگهی کوچک
HETEREN
۴٬۴۰۴ km
VolvoFH 540 8x4 EFFER 685/6S + JIB 6S
آگهی کوچک
Haldenwang
۴٬۰۰۶ km
ZopfAH 40
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است






























































































































