Cold Feed Rubber Vacuum Extruder

Zhejiang Baina 150 20D 1000Kg/H

Cold Feed Rubber Vacuum Extruder 150mm 20d
manufactured by years: 2020
condition in new

Equipment type E150-01-00
Screw diameter 150 mm
Screw Speed 1-50 r/min
Max output Around 1000kg/h
Temperature control system
The heating section number/power 6kw×7

Ncodpey Ez Erefx An Tjr
Application Rubber extrusion mixing and plasticization, and extrude certain size of products in accordance with the machine head

External dimensions 4200×1600×1500 (L×W×H)mm
Extrusion system
The feeding way Side rolls transmission power through the screw, active feeding.
Feeding structure
Feed roller gear and the screw gear, and with automatic lubricating device.
Screw material 38GrMoAcA
Screw hardness HRC65-68
hardness of steel sleeve HRC65-70
Nitriding depth 0.4—0.7mm
Screw structure With exhaust slot, with good performance of Pressure control With the pressure sensor, pressure protectionvalue 0-35MPA adjustable, also with a temperature sensor
L/D 20:1
Cooling section 1 section (side rolls)
Vacuum pump power 2.2 KW

Temperature control Automatic control heating, cooling by
electromagnetic valve
Circulating pump brand Weile
Cooling water pressure 0.15-2 kg/cm2
Temperature control accuracy ±1℃
Screw and the gear box Involute connection
Drive of the motor and the reducer Belt drive
Hardened reducer model Reducer (involute) ZLYJ420-28-I
speed regulation Frequency conversion
2. Rubber sheet head(Pneumatic)
1 Equipment type E200-PDJT-03-00
2 Equipment use With the use of extruder, extrusion foaming plate for expansion
Dimensions 1170×510×330 (L×W×H) mm
Head Material 40Cr
Heating mode By mold temperature unit, the water cycle control
Heat treatment Quenching and tempering, carburizing
Surface treatment electroplate
runner structure Straight type