Temperature control unit

WITTMANN TP+D-S-1:140

The Wittmann plus D140 temperature control unit is for sale. The device was used in a technical center, which explains the low operating hours. Original price: €5,260

- Max. water temperature: 140°C in the mold supply line
- Max. system pressure: 10 bar in the mold return line
- Pump: 0.5 kW (1.4A) / 50Hz, max. 40 l/min, max. 4.5 bar, seal-less and magnetically coupled
- Heating capacity: 7.5 - 9 kW (11.5 - 12.5A) at 380 - 415V
- Cooling capacity: 20 kW at ΔT = 75°C (indirect cooling)
- Operating voltage: 3x 380 – 415 V, 50 Hz
- Control voltage: 24V AC
- Power consumption: 14.5A / 9.5kW (the total connected load increases if options such as reinforced pump or additional heating capacity are added)
- Main connection: 4m cable incl. 16A CEKON plug
- WITTMANN 4.0 interface including license, with shielded RJ45 socket
- USB port: socket for software updates and data logging
- Mold supply and return: G3/4'' female thread
- Mold circuit with angle-seat strainer, mesh size 0.25mm
- Water inlet and outlet: G3/8'' female thread
- Strainer in water inlet: G3/8'' female thread, mesh size 0.3mm
- Color: RAL7047 (Telegrey 4), front RAL3004 (Purple red)
- Weight: Net: 65 kg, Gross: 82 kg (incl. pallet and packaging)
- Dimensions (L x W x H): 840 x 265 x 650 mm
- Dimensions incl. pallet & packaging (L x W x H): 920 x 630 x 830 mm
- Fill volume: 3 liters
- Noise level: 70 dB(A)

Media:
- Process and cooling medium: water
Rcodpfx Aey Atnysqpob

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.