Portal milling machine

Waldrich Siegen MCP S1500/TP 3000

5-Axis Gantry Milling Machine WALDRICH
Product manufactured on the machine: AIRBUS LANDING GEAR (aerospace)
Year of construction: 1995; Delivery year: 1998
Installation & Commissioning: 1999
Operating period: 03/1999 to 07/2022 (21 years)
Condition: Very Good
Customer Specifications / History
Previous owner (1999–2022): German aerospace group
Technical Specifications
Travel Distances & Working Area
X-axis (longitudinal table travel): 4,000 mm
Y-axis (cross-slide traverse): 2,500 mm
Z-axis (vertical ram travel): 1,000 mm
Clearance between columns: 2,000 mm
C-axis: 360,000 positions (increment 0.001°)
B-axis: 360,000 positions
Tables & Pallets
Number of tables: 2
Table dimensions: 1,500 x 3,000 mm
Hsdpfx Adex Hxdzehjfr
Table height above floor: 740 mm
Max. table load: 12,000 kg
Feed & Rapid Traverses
X/Y/Z: Feed 0–6,000 mm/min, rapid traverse 15,000 mm/min
B-axis nutator: 0–3,600 deg/min
C-axis nutator: 0–3,600 deg/min
Feed Forces / Torque
X/Y/Z max.: 30 kN each
C-axis detachable torque: max. 20,000 Nm
C-axis bearing control: max. 4,000 Nm
Speed range
Stage I: 20–875 rpm
Stage II: 876–4,000 rpm
Spindle Drive
Power: 50 kW
Speed range: 20–4,000 rpm
Tool Change System
Type: Chain magazine
Capacity: 120 tools
Tool holder: ISO 50
Max. tool diameter: 315 mm
Tool diameter at full occupancy: 100 mm
Max. tool length: 550 mm
Max. tool weight per gripper: 35 kg
Spindle Units / Distances
Vertical spindle unit: Spindle nose – table surface 250–1,250 mm
Horizontal spindle unit: Spindle center – table surface 150–1,150 mm
Nutator (MC303): Spindle center – table surface 45–1,045 mm
Coolant & Lubrication
Coolant supply: internal and external available
Lubrication: automatic (spindle bearings and gearbox)
Dimensions & Weight
Machine dimensions (approx.):
Length: 14,700 mm
Width: 10,000 mm
Height above floor: 6,079 mm
Total machine weight (approx.): 72,500 kg
Machine bed: 8,500 kg
Machine table & pallet: 16,000 kg
2 columns: 10,200 kg
Crossbeam with platform: 20,000 kg
Special Features & Accessories
Fully automatic tool changer (ATC): 120 stations (ISO 50)
Fully automatic head changer incl. universal milling heads
Milling head:
C-axis: 360,000 x 0.001°
B-axis: 360,000°
Accessories:
3 chip conveyors
Toolbox + pallets with loose accessories
Packing List (Transport Dimensions)
Axes: 8,950 x 1,700 x H 1,000 mm
2 tables: 3,300 x 1,700 x H 340 mm
Tool changer with carriage: 3,500 x 2,300 x H 2,670 mm
Tool changer without carriage: 4,450 x 1,060 x H 1,870 mm
Pick-up heads: 3,000 x 470 x H 2,200 mm
Crossbeam: 7,000 x 2,000 x H 2,500 mm
2 support columns: 2,900 x 1,000 x H 1,500 mm
Carriage with RAM: 3,450 x 1,800 x H 2,100 mm
Chain section: 3,700 x 2,000 x H 1,100 mm
Electrical cabinet No. 1: 5,400 x 600 x H 2,000 mm
Electrical cabinet No. 2: 2,100 x 650 x H 2,000 mm
Chip conveyor: 5,000 x 500 x H 2,300 mm
Head: 900 x 600 x H 700 mm
Tool case: 2,100 x 1,200 x H 600 mm
7 pallets with loose accessories

This WALDRICH SIEGEN 5-axis portal milling machine is ideally suited for machining steel, cast iron and non-ferrous metals. The combination of a 50 kW spindle drive, automatic tool changer (120 stations), fully automatic head changer, and high-precision B/C axis positioning (0.001°) makes it the ideal solution for demanding and complex manufacturing tasks.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.