Profile bending machine

Wafios FTU 5.3-98

25/11/2025
Minimum wire diameter: 3.0 mm
Maximum wire diameter (depending on tensile strength):
up to 6.5 mm at ≤1600 N/mm²
up to 7.5 mm at ≤1200 N/mm²
up to 10.0 mm at ≤800 N/mm²
up to 13.0 mm at ≤600 N/mm²
Maximum wire feed speed: approx. 40 m/min
Wire feed length: unlimited (limited only by part length and space)
Maximum coil diameter (closed ring): 1000 mm
Distance from bending head center to machine front panel: 1000 mm (working depth)
Minimum distance between two bends: ≥ 3 × wire diameter
Power consumption: up to 18 kW (peak), approx. 10 kW (typical operation)
Compressed air pressure: 6 bar
Compressed air consumption: 1–30 L/min (depending on configuration)
Gjdpfx Aexr Ncvjdhjkf
Machine weight: approximately 7500 kg