Laser machine for tube processingTRUMPF
Tubematic
Laser machine for tube processing
TRUMPF
Tubematic
VB به اضافه مالیات بر ارزش افزوده
€۵۵٬۰۰۰
سال ساخت
۲۰۰۵
وضعیت
کارکرده
موقعیت
Лубни 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- Laser machine for tube processing
- تولید کننده:
- TRUMPF
- مدل:
- Tubematic
- سال ساخت:
- ۲۰۰۵
- وضعیت:
- کارکرده
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
VB به اضافه مالیات بر ارزش افزوده
€۵۵٬۰۰۰
- موقعیت:
- Світанкова 3, 37503 Лубни, Україна

تماس بگیرید
جزئیات فنی
- نوع کنترل:
- کنترل CNC
- درجه اتوماسیون:
- خودکار
- نوع تحریک:
- هیدرولیک
- قطر لوله (حداکثر):
- ۲۵۰ میلیمتر
- طول لوله (حداکثر):
- ۶٬۰۰۰ میلیمتر
- قدرت:
- ۶۰ کیلووات (۸۱٫۵۸ اسب بخار)
- ولتاژ ورودی:
- ۴۰۰ V
- تجهیزات:
- توقف اضطراری, واحد خنککننده
جزئیات پیشنهاد
- شناسه آگهی:
- A21113897
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۹.۱۱.۱۴۰۴
توضیحات
For sale: TRUMPF TUBEMATIC Tube Laser Cutting Machine – Fully Equipped.
The machine was used in industrial production and is in full working condition. Professionally dismantled and preserved in complete configuration.
Scope of supply:
- Bed and mechanical components
Psdpfx Aeyfnblof Usgg
- Electrical cabinets with original TRUMPF electronics
- Drives, control units, power modules
- Cooling system (chiller)
- Cable tracks, sensors, wiring, etc.
Machine technical specifications:
X-axis travel: 6500 mm
Y-axis travel: 200 mm
Z-axis travel: 150 mm
Workpiece sizes:
Stock length
* For manual loading: 141–6500 mm
* For automatic loading: 3000–6500 mm
Max. finished part length: 2000 mm
Min. tube remnant length: 141 mm
Wall thickness: 0.8–6.4 mm
Round tube dimensions: Ø20–Ø150 mm
Square profile dimensions: 20x20–120x120 mm
Rectangular profile dimensions: 20x20 – max. oval Ø150 mm
Workpiece weight:
Max. workpiece weight: 120 kg
Max. workpiece weight for unloading station: 40 kg
Max. bundle weight: 4000 kg
Speeds:
X-axis: 100 m/min
Y-axis: 40 m/min
Z-axis: 40 m/min
A-axis: 720 º/s
Positioning accuracy1:
Position deviation: ±0.2 mm
Average range deviation: ±0.06 mm
According to VDI / DGQ 3441, the measured length is 1 m. Processing accuracy depends on material type, its preprocessing, dimensions, and position in the working area.
Control system:
CNC TRUMPF – Siemens Sinumerik 840 D
Total weight of the basic machine configuration: 15,460 kg
Laser data:
TRUMPF TLF CO₂ laser with high-frequency excitation – TLF 2000
Guaranteed max. laser power (programmable in 1% steps): 2000 W
Pulse repetition rate: TEM00
Gas consumption:
Laser gases *CO₂ – 1 l/h
*N₂ – 6 l/h
*He – 13 l/h
Cutting gases *O₂ – depending on application
*N₂ – depending on application
Laser cooling: closed circuit
Maximum power requirement for full system: 63 kW/h
Pneumatic connection: 7–10 bar
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
The machine was used in industrial production and is in full working condition. Professionally dismantled and preserved in complete configuration.
Scope of supply:
- Bed and mechanical components
Psdpfx Aeyfnblof Usgg
- Electrical cabinets with original TRUMPF electronics
- Drives, control units, power modules
- Cooling system (chiller)
- Cable tracks, sensors, wiring, etc.
Machine technical specifications:
X-axis travel: 6500 mm
Y-axis travel: 200 mm
Z-axis travel: 150 mm
Workpiece sizes:
Stock length
* For manual loading: 141–6500 mm
* For automatic loading: 3000–6500 mm
Max. finished part length: 2000 mm
Min. tube remnant length: 141 mm
Wall thickness: 0.8–6.4 mm
Round tube dimensions: Ø20–Ø150 mm
Square profile dimensions: 20x20–120x120 mm
Rectangular profile dimensions: 20x20 – max. oval Ø150 mm
Workpiece weight:
Max. workpiece weight: 120 kg
Max. workpiece weight for unloading station: 40 kg
Max. bundle weight: 4000 kg
Speeds:
X-axis: 100 m/min
Y-axis: 40 m/min
Z-axis: 40 m/min
A-axis: 720 º/s
Positioning accuracy1:
Position deviation: ±0.2 mm
Average range deviation: ±0.06 mm
According to VDI / DGQ 3441, the measured length is 1 m. Processing accuracy depends on material type, its preprocessing, dimensions, and position in the working area.
Control system:
CNC TRUMPF – Siemens Sinumerik 840 D
Total weight of the basic machine configuration: 15,460 kg
Laser data:
TRUMPF TLF CO₂ laser with high-frequency excitation – TLF 2000
Guaranteed max. laser power (programmable in 1% steps): 2000 W
Pulse repetition rate: TEM00
Gas consumption:
Laser gases *CO₂ – 1 l/h
*N₂ – 6 l/h
*He – 13 l/h
Cutting gases *O₂ – depending on application
*N₂ – depending on application
Laser cooling: closed circuit
Maximum power requirement for full system: 63 kW/h
Pneumatic connection: 7–10 bar
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ارسال درخواست
تلفن & فکس
+380 95 4... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
آگهی کوچک
Birmingham
۴٬۹۲۸ km
TRUMPFTubematic
آگهی کوچک
Birmingham
۴٬۹۲۸ km
TRUMPFTUBEMATIC 3.2KW
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است




























