Tube end forming machine

transfluid Maschinenbau GmbH UMR 642-CN

Tube flaring machine, hydraulic flaring machine, 37° flaring machine, 90° flaring machine, ORFS flaring, JIC flaring, tube end processing, flaring device, tube processing machine, rotary forming machine

Capacity:
- For tubes from 6 - 42 mm Ø
- Max. wall thickness (on tube-Ø 42 mm in steel) 4 mm
- Cycle time (adjustable per form/shape) 4 - 15 sec.
- Rotation/min 200

Machine equipment-/basic accessories:
- For end forming of tube with angle between 37° to 90° (dependent on tooling)
in one operation step via rotary principle
- Depending on the tube diameter, 180 ° bends with a clearance of
145 mm can be machined
- Length of the clamping dependent on tube size, approx. 1,0 x D
- Forming length dependent on tooling
- Operation and control via touch panel
- Start of operation via pushbutton
- Hydraulic forward movement, speed adjustable
- Electric adjustable length stop to control the required flare diameter
- Electric adjustable front feed of the tool holder
- Electric adjustable rolling time
- Clamping jaw can be swiveled, for easier loading of ORFS rings
- Integrated drawer for storage of tools
- Including transparent safety covers of the work area
- Standard norm electric and hydraulic equipment
- Machine stationary with underframe
- Colour RAL 7047 grey, RAL 3020 rot

Drives:
- Clamping of the tube: servo-hydraulic
- Front feed tool holder: servo-hydraulic
- Rotation tool holder: electric

Machine data:
- Nominal pressure 250 bar, Operating pressure 200 bar
- Operating voltage 400 Volt - 50 Cyl. - 3 Ph. - 4,5 kW
The average consumption of the machine is approx. 1,8 kWh/h.
As the consumption is highly dependent on factors such as tube size and
geometry, speeds and power supply to the machine, it can only be used as a guide.

- Length 1230 mm
- Width 710 mm
- Height 1240 mm
- Weight approx. 800 kg
Codpfx Aswzbc Neg Isrk