Chip processing plant

SPYRA Komplettanlage Zentrifuge, Förderer, Zerkleinerer

Chip processing plant for the deoiling of chips of all types (can be customized to your requirements).

With this system, coarse and foreign materials are not a problem! The machines are patented and specifically designed so that foreign parts in the chips are automatically ejected.

Included in the scope of delivery:
- SPYRA chip crusher ZE 2000
- AME hinged belt conveyor (between crusher and centrifuge)
- SPYRA chip centrifuge 500H (can be replaced with the larger 600H centrifuge upon request)
- Additional discharge conveyor (if required)

Not included but available as optional upgrades:
- Tipping and lifting device for fully automatic filling of the chip crusher
- Filtration system for extracting oil from the chips for reuse
- Control cabinet

Technical data for the SPYRA chip crusher ZE 2000:

Total height with hopper: approx. 2,318 mm
Dimensions (L x W): approx. 1,500 x 800 mm
Weight: 2,000 kg
Motor power: 22 kW
Voltage: 400 V/50 Hz
Speed at tear arm: 40 rpm
Torque at tear arm: 3,500 Nm
Inner diameter of tearing hopper (bottom): 315 mm
Inner diameter of tearing hopper (top): 782 mm
Height of tearing hopper: 412 mm
Hopper capacity (tearing hopper): 85 liters
Hydraulic unit
Motor power: 0.75 kW
Pump output: 2.4 liters/min
Hydraulic tank capacity: 5 liters
Operating pressure: 10–80 bar
Maximum pressure: 160 bar

Technical data for SPYRA chip centrifuge PSZ 500 H:

Fgodpfoyzhdyjx Abfja
Outer diameter: Ø 1,160 mm
Drum diameter: Ø 500 mm
Feed hopper: Ø 700 mm
Discharge hopper: Ø 800 mm
Total height (with frame height 1,160 mm): 2,735 mm
Motor power: 4 kW
Connection: 400 V/50 Hz
Drum speed: 1,200 rpm
Hydraulic unit, Spyra standard
Power: 4 kW
Voltage: 400 V
Tank volume: 100 l
Operating pressure (without oil filling): 100 bar
Inspection cover bolted. No electrical monitoring.

Alternative larger centrifuge PSZ 600 H:

Outer diameter: Ø 1,260 mm
Drum diameter: Ø 600 mm
Feed hopper: Ø 700 mm
Discharge hopper: Ø 900 mm
Machine height without base: 1,900 mm
Discharge height: 835 mm
Total height (with frame height 1,160 mm): 2,735 mm
Total height is variable by adjusting the frame and hopper height
Motor power: 5.5 kW
Connection: 400 V/50 Hz
Drum speed: 1,000 rpm
Hydraulic unit, Spyra standard
Power: 4 kW
Voltage: 400 V
Tank volume: 100 l
Operating pressure (without oil filling): 100 bar

If needed, please contact us for a tipping and lifting device, swiveling discharge conveyor, filtration system, or control cabinet.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.