Travelling Column Milling Machine

Soraluce SP10000

USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647

Table Area - 10000 x 1100 mm
Column Traverse (X) - 8500 mm
Vertical Traverse (Y) - 1600 mm
Ram Traverse (Z) - 1200 mm
Spindle Motor - 28 kW
Spindle Taper - Standard ISO 50 BT50 tooling
Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A
Independent Gearbox with 2 Ranges
Speed Range - 20 to 4000 RPM
Feed Range - 5 to 5000 mm/min
Rapid traverse rate - (X, Y, Z) 15,000 mm/min

Preloaded double nuts and recirculating ballscrews to each axis.
Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes
Independent A.C Drive motor to each axis.
Linear Transducer in X, Y and Z-axes with air purge system.
Automatic tool clamping. Automatic hydraulic tool releasing device.

CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated.

Working area lighting
Electrical cabinet cooling system
Electrical cabinet lighting
Heidenhain HR410 portable electronic handwheel with 3m spiral cable
Horizontally articulated pendant for CNC control
Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included.
Coolant through the spindle type AD.
Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit.
Standard operators platform fixed to the column
Guodpfx Afjuv Hrdo Dod
40 tools capacity toolchanger magazine, BT50
Max. Tool length = 400 mm.
Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm.
Max. Tool weight = 20 kg.
Mean tool weight with full magazine = 10 kg.
Max. Permitted total weight = 20 kg.
Swarf Conveyor
Hinge type conveyor belt
Machine preparation for the addition of a 4th axis electro-mechanical table.
Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open.
Protection in the back and both lateral sides of the machine column.