3D metal printer

SLM 280 2.0 Single 700W + PSM 100

No minimum price - guaranteed sale to the highest bidder!

The system has been serviced annually by SLM Solutions. Service reports and machine evaluation are available upon request.

The system includes the "Material Change Kit SLM280 2.0 complete incl. PSM100" and a second set of filter housings, minimizing the effort required for switching between two materials.

TECHNICAL DETAILS

Laser power: up to 700 W

Materials: suitable for all common materials in the SLM process

Temperature range: 20–25 °C
Relative humidity: max. 60 %
Floor unevenness: max. 5 mm/m²
Floor load capacity: min. 2,200 kN/m²

Floor surface: antistatic, solvent-resistant, liquid-tight, smooth

Processing area and process data
Build volume (L x W x H): 280 x 280 x 365 mm
Actual build rate: up to 113 cm³/h
Variable layer thickness: 20–90 μm
Minimum feature size: 150 μm
Beam focus diameter: 80–115 μm
Scanning speed: max. 10 m/s

Laser type: IPG fiber laser
Single laser 700 watts

Media supply
Operating pressure argon: 7–8 bar
Operating pressure nitrogen: 7–8 bar
Operating pressure compressed air: 7–8 bar
Operating pressure cooling water: 4 bar
Compressed air quality: ISO 8573-1:2010 [1:4:1]

Volume flow rate primary circuit: 1.4 m³/h
Cooling water supply temperature min.: 18 °C
Cooling water supply temperature max.: 20 °C

Cooling medium: Coolflux

MACHINE DETAILS

Controller: SLM MCS

Electrical connection values
Connection: CEE 3/N/PE
Voltage: 400 ±10 % V
Frequency: 50/60 Hz
Current consumption: max. 40 A
Connection power: 3.5–5.5 kW
Heating power: 1,200 W
Cooling capacity: 4.6 / 5.8 kW
Largest motor: 7.5 kW

Dimensions & Weight
Dimensions (L x W x H): 2,600 x 1,200 x 2,700 mm
Shipping weight: 1,870 kg

Operating hours: approx. 6,700 h

EQUIPMENT
Cooling is provided by the "Cooling unit HRS050 L/W
Sieving station PSM100 V3
Handling device BPH280 and bottle lift (facilitates the handling of powder containers and the removal of the substrate plates after printing)
Material change kit SLM280 2.0 complete incl. PSM100
Powder containers
Substrate plates (1.2709 & AlSi10Mg)
additional filter housings
Filter elements

The system is currently in operation and can be inspected by arrangement. After the auction ends, the system will be dismantled by the machine manufacturer, loaded onto the company premises, and handed over to the buyer.