Engraving machine

SK LASER GmbH F20iW1 – 20W mit autom. Schubladensystem

New: SK LASER KOLLTRONIC F20iW1 – 20 W IPG fiber laser with automatic drawer system, Laser Class 1

System Concept
- Complete system consisting of fiber laser + Workstation 1 with a drawer system for efficient loading and unloading.
- Automatic initiation of the laser job when the drawer is closed. At the end of the job, the laser head is automatically retracted in the Z-direction from the working area.

Workstation & Drawer System:
- Sitting/standing workstation with ample legroom
- Aluminum housing
- Bright work light, suction connection DN50
- Drawer system: 2 positions, max. load 300 kg (150 kg per side)
- Drawer dimensions approx. H = 500 mm × W = 700 mm, motorized travel
- Doors monitored by sensors, safety equipment: emergency stop, interlock, safety relay

Axis System – SK LASER X, Y, Z travel:
- X-axis 500 mm computer-controlled
- Y-axis 2 × 500 mm computer-controlled
- Z-axis 350 mm computer-controlled (travel distances depend on installation)
- Two spindles per axis for increased stability
- Axis controller
- Made in Germany

Laser – IPG fiber laser:
- Diode-pumped ytterbium fiber laser
- Output power: 20 W
- Peak power: 1 mJ at 20 kHz
- Pulse duration: 200 ns
- Wavelength: 1060 – 1070 nm
- Pulse frequency: 20–80 kHz
- Beam quality M² < 1.6
- Air-cooled, power consumption < 400 W
Nwjdpfxjyizr Se Ahuec
- Red pilot laser + 2 distance lasers (650 nm,

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.