Laser welding system

SITEC / TRUMPF Laser-Schweißanlage

1 laser system with 1 loading station, 2 nests each

- Up to 4 welding fixtures
- Laser power: 3.3 kW
- Beam source: Trumpf Trudisk 3302 disk laser
- System manufacturer: Sitec
- Operating hours: approx. 70,000 h
- Max. workpiece dimensions: approx. 300 x 100 x 100 mm
- Larger workpieces possible
- Beam guidance via laser light cable (LLK)
- Laser welding with Trumpf BEO D 70 welding optics on one axis system.
- Inline laser monitoring system for weld seam monitoring
- Welding speeds: up to 5600 mm/min
- Welding penetration depth: 1.5 mm
- Welding with shielding gas possible! For aluminum or stainless steel
- Fixtures can be water-cooled!
- 2 rotary axes per table side, individually programmable

PROGRAMMING:
4 cylinder clamping circuits per tool
10 inputs via slip ring rotary distributor
8 additional inputs per tool via radio system
Inputs freely configurable via user interface (end position / part control / setup control)
Clamping and release programs and part queries fully programmable via NC program
No PLC programming required
System fully programmable via Siemens control (G-code)
Laser programmed via Trumpf TruControl and called via Siemens control (G-code).

Output Guidelines
T 1:
2 weld seams (each 100 mm in diameter, weld penetration depth = 1.5 mm)
2 components per side of the table
approx. 250 parts per hour
T 2:
17 weld seams (each 10 mm in diameter, weld penetration depth = 1.2 mm)
2 components per side of the table
approx. 190 parts per hour

Pedpfxswm I H Sj Apbjgr
The system can be viewed live!

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.