Facing and Centering Machine

SINICO TR 60/4-650

max. workpiece diameter 40 mm
min. workpiece diameter 10 mm
workpiece length 200 - 640 mm
Control SPS Siemens S5 95 U
total power requirement 25 kW
weight of the machine ca. 5 t
dimensions of the machine ca. 8,5 x 2,8 x 2,35 m
Hydraulic cutting and double-end machining machine suitable for pre-machining
trapezoidal thread spindles and other round workpieces in the form of sawing
off the bar and double-sided end machining such as chamfering, countersinking
and drilling with fixed parts and rotating tools.
Machine consisting of:
- Basic machine model TR 60/4-650, passage 640 mm
- Bar magazine for bar lengths 2 - 3.5 m
- Normal version for solid material up to ? 40 mm
- Central position of the bar feed rollers
- Bar feed unit
- Feed gripper in standard version
- Cross switch with 4 clamping stations model TR 300.00
- 4 base jaws, width 80/140 mm, contact ? 75 mm
- Swiveling cross switch in both directions
- Saw unit with worm drive TR 200.00, stroke 100 mm
- Saw blade 350 mm, speed 25/39 rpm
- Motor power 2.6/3.2 kW
- Motorized positioning of saw head
- Automatic positioning of saw stand with hydraulic. Clamping
- Saw blade guide
- Processing unit no. 1 - USP.00/M
- Speeds 842/1684 rpm, kW 3.3/4.0
- Working stroke 80 mm
- Rapid feed 40 mm
- Spindle mount ISA 40/M 16
- Toothed belt drive
- Machining unit no. 3 - USP.00/M
- Speeds 842/1684 rpm, kW 3.3/4.0
- Working stroke 80 mm
- Rapid feed 40 mm
- Spindle mount ISA 40/M 16
- Toothed belt drive
- Machining unit no. 4 - USP.00/M
- Speeds 943/1882 rpm, kW 3.3/4.0
- Working stroke 80 mm
- Rapid feed 40 mm
- Spindle mount ISA 40/M 16
- Unloading chute
- Millimeter bars for all adjustment movements
- Hydraulic system with feed pump SAUER SUNDSTRAND
- Pressure accumulator
- Rexroth flow regulator for machining units and saw
- Coolant system with filter and container
- Coolant pump CALPERA
- Electrical equipment in separate electrical control cabinet,
Control voltage 24V/50 Hz
- PLC SIEMENS S5 95 U
- Machine light
- Flashing light to signal machine downtime
- Central lubrication
- Chip conveyor.
Klsdpevp Sd Iefx Aazsl
In 2011, an extensive mechanical overhaul was carried out to optimize
positioning and centering accuracy for € 25.000. In addition, switches, some
cables, ball bearings, seals, hydraulic hoses, etc. were replaced.
The machine has hardly been used in recent years; the seller estimates the
whole operating hours at around 24,000. Machine under power in sellers factory.
Machine dealer with own stock of 1600 m².